Jump to content
SAU Community

Recommended Posts

Got tired of the wiseling sound of the turbo(i'm not young any more...)so on saturday i took the pod filter off the car and put the air box back in place...and i looks to take longer to get to full boost(much longer)pod was apexi and airbox has a apexi panel filter so basically it's the same;before it used to jump in full boost now it takes a while and the car car feels sluggish so don't know what's going on...Any ideas????????????

Can you use the pod inside the airbox?

No ,as i said it's an apexi power intake ,even when it's smaller than K&Ns and other Brands still doesn't fit...

Intake leak near the afm?

Nope,checked that already (and damaged a hose clamp over tightening,but replaced it) BTW is it comon to have black deposits in the mesh of the AFM?

Yeh, just fine dust particles. Did you clean it?

No,didn't have nothing very soft so didn't want to damage it ,or you saying if cleaned the sensor with CRC9?(what I didn't)

Get some airflow sensor cleaner from autobarn mate. :thumbsup:

Got some CRC from burson the car is idling more smooth but still slug...anyway thanks for the advice it feels better after cleaning the MAF sensor(that shit really works)

Edited by southern_tango

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, fun day was had, I finally found a house that will do me just fine, 1980's brick build, but with full fresh renovations, plus new colour bond fencing all round so puppies are incoming 🐕, and water tanks for the garden, and it's located in West Goulburn..... @Duncan 🫡, so day trips to Wakie to watch cars going Zoom will be on the cards In the end it cost well under my budget and was actually better than alot of the more expensive joints I was looking at, it is in a good area, close enough to the shops, public transport, and the Wollondilly River Weir,  and the great walking paths along the river, but far enough away from town to see minimal traffic The deposit is dropped, the conveyancer is conveyancing and I should get the keys in a week or 2 as the property is currently unoccupied  As with everything I own, I'm doing up a modifications list, as it doesn't have solar, that is first up on the big list, all of the panels and enough batteries to keep the joint warm, or cool, followed by a largish carport out the front, the small list, which will start as soon as I have keys, is some security stuff, like cameras, screens, and the usual "crazy prepper" additions that weird old people like (mouse holes to stick shot guns out of, and the usual man traps that the average person installs for the unsuspecting and unwanted guests 🤣) The gardens front and back are OK, but, not to my standards or liking, so landscaping will be a fun job to start getting into, so when spring is sprung I'll do a heap of planting, lots of natives and vegetables is the plan, the old owners were more "Old English Garden" type, so basically Roses and other weird looking things that are destined for the green waste bin One thing that is staying garden wise is a nice established hedge out the front, it is about 5 foot tall and covers the whole front of the property from prying eyes As for the car hoist, the roof in the garage has some height to it, but, I'll need to get an installer out to see what can be done, width wise may be a issue, but my building inspector will be getting back to me over the next week with his recommendations  Small, but cosy     
    • I tried to get in contact before I went to QLD you didn’t respond, then I tried to contact you in r31 club.  I thought you fell off the earth or something haha.  I will grab it off you but unknown when I will be up that way 
    • I think that might be in the question. He is going very low, and I think the standard GTR ones are simple tripod joints (like the rear NA/S chassis ones), not proper CVs (like R chassis turbo/GTR ones). Proper CVs take the misalignment better than tripods.
    • Do you still need the wiper motor and stuff?
    • I haven't used the Crank Motorsport ones, but can I ask why not use standard gtr/gts4 axles at the front? They would easily cope with that power level. BTW.....sounds like quite the project!
×
×
  • Create New...