Jump to content
SAU Community

Recommended Posts

Hey guys,

Recently acquired one of these beauties and need some little things to get it up to scratch... most things are very small.

Here's the list.

- 2x Clips that secure the stock air snorkel to the front radiator support.

- 4x Clips that secure the lining in the boot / near the lights and side areas.. There those twist half out and pull kinda ones.

- 2x Clips that secure the plastic cover on the boot hinge.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- 2x Washer nozzles for the bonnet IF they are meant to be black normally .. (mine looked sprayed silver?)

- Nismo Clear side and front indicators.

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Billet Oil Cap

- My car has 2 red lenses in the doors for courtesy lights, but no lights/fittings behind them... does anyone have these fittings? What models had them hooked up?

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I know this is kinda wanky, but anyone have a kick panel flare? Mine's been removed! (wanted to make it all as original, not spending $100+ though...)

- One of those boot corner mounted sub boxes

That's all i can think of at the moment. Please let me know via this thread or PM if you have any of these or can help out in any way.

Thanks, Kurt.

Link to comment
https://www.sau.com.au/forums/topic/386923-shoujikis-wtb-thread-for-r34-gtt/
Share on other sites

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

Seems like people are just messy when doing work and don't put stuff back properly! Common thing with people that don't know how to work on cars and take care of them haha!

Yeah I'd say the courtesy lights are wired up for certain models. I'm sure the GTR has them in, as i've seen a few lit up. They must just use the same door panels. I'd like mine working though, be a nice touch.

Got a few parts already from some great members here, thanks so far!

So far have got :

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Clear side and front indicators.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

I also have had 2 offers for a flare (which i appreciate!) however there sold without the holder, mine has the holder removed, so I'd need that too. Around $50-60 is all I can swing to.

Bumparoo up you go!

Edited by Shoujiki

Hey Redline GTR... Yeah i actually found all the clips for my boot and what i needed from a local wreck here in Victoria... he still has quite a few on the car so give him a bell ... he has a R34 wrecking thread . Suji is his username.

So i need these last few things:

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I have the flare now, BUT, i need the "holder" part that screws to the kick panel itself .. anyone got a car that has the flare removed but still the holder?

- One of those boot corner mounted sub boxes

Thanks!

Edited by Shoujiki

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- One of those boot corner mounted sub boxes

Have sourced a flare and holder from an awesome member that gave me it for nothing! So, just the final things on my list left now above, anyone help out?

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- Plastic Trim that hides the screws that mount the driver side mirror, interior panel. Commonly where people put spllt tweeters. (mine has a busted clip)

Bump! Updated and removed parts I have sourced and now have. Added in one more interior panel, not sure what you'd call it but it's a panel that hides the screws for the drivers side mirror, its a triangle shape with 2 clips. Mine has 1 busted clip so need a new panel.

cheers.gif

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!">

Updated!

Edited by Shoujiki
  • 2 weeks later...

Bump! Just need these last few bits!

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...