Jump to content
SAU Community

Shoujiki's Wtb Thread! For R34 Gtt

Shoujiki

By Shoujiki,
in Wanted to Buy

 Share

Recommended Posts

Shoujiki Proficient

Shoujiki

Posted
Posted

Hey guys,

Recently acquired one of these beauties and need some little things to get it up to scratch... most things are very small.

Here's the list.

- 2x Clips that secure the stock air snorkel to the front radiator support.

- 4x Clips that secure the lining in the boot / near the lights and side areas.. There those twist half out and pull kinda ones.

- 2x Clips that secure the plastic cover on the boot hinge.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- 2x Washer nozzles for the bonnet IF they are meant to be black normally .. (mine looked sprayed silver?)

- Nismo Clear side and front indicators.

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Billet Oil Cap

- My car has 2 red lenses in the doors for courtesy lights, but no lights/fittings behind them... does anyone have these fittings? What models had them hooked up?

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I know this is kinda wanky, but anyone have a kick panel flare? Mine's been removed! (wanted to make it all as original, not spending $100+ though...)

- One of those boot corner mounted sub boxes

That's all i can think of at the moment. Please let me know via this thread or PM if you have any of these or can help out in any way.

Thanks, Kurt.

Link to comment
https://www.sau.com.au/forums/topic/386923-shoujikis-wtb-thread-for-r34-gtt/
Share on other sites
rondofj Veteran

rondofj

Posted
Posted

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

Seems like people are just messy when doing work and don't put stuff back properly! Common thing with people that don't know how to work on cars and take care of them haha!

Yeah I'd say the courtesy lights are wired up for certain models. I'm sure the GTR has them in, as i've seen a few lit up. They must just use the same door panels. I'd like mine working though, be a nice touch.

Got a few parts already from some great members here, thanks so far!

So far have got :

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Clear side and front indicators.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

I also have had 2 offers for a flare (which i appreciate!) however there sold without the holder, mine has the holder removed, so I'd need that too. Around $50-60 is all I can swing to.

Bumparoo up you go!

Edited by Shoujiki
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)

Hey Redline GTR... Yeah i actually found all the clips for my boot and what i needed from a local wreck here in Victoria... he still has quite a few on the car so give him a bell ... he has a R34 wrecking thread . Suji is his username.

So i need these last few things:

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I have the flare now, BUT, i need the "holder" part that screws to the kick panel itself .. anyone got a car that has the flare removed but still the holder?

- One of those boot corner mounted sub boxes

Thanks!

Edited by Shoujiki
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- One of those boot corner mounted sub boxes

Have sourced a flare and holder from an awesome member that gave me it for nothing! So, just the final things on my list left now above, anyone help out?

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- Plastic Trim that hides the screws that mount the driver side mirror, interior panel. Commonly where people put spllt tweeters. (mine has a busted clip)

Bump! Updated and removed parts I have sourced and now have. Added in one more interior panel, not sure what you'd call it but it's a panel that hides the screws for the drivers side mirror, its a triangle shape with 2 clips. Mine has 1 busted clip so need a new panel.

cheers.gif

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)
- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!">

Updated!

Edited by Shoujiki
  • 2 weeks later...
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

Bump! Just need these last few bits!

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...