Jump to content
SAU Community

R32 Upgrade Nistune And Other Parts

just_racing
 Share

Recommended Posts

just_racing Collaborator

just_racing

Posted
Posted

Put a hole through a piston on my RB20 so I have upgraded for my next build. I have some good budget parts to get your RB20 going harder.

I am negotiable and will do a good price if you want to bundle it up for a package deal.

R32 GTST ECU with Nistune fitted. Looking for $600. Was fitted March 2011 and has done only 3 or 4 track days.

post-40739-0-52096900-1325497287_thumb.jpg

6 x RB26 injectors. $200. Bought them off another member but never fitted them myself. I was told they were working when they came out. You will need to add a resistor pack to use these in the RB20 but there is a whole thread on how to do this.

post-40739-0-42458500-1325497743_thumb.jpg

Z32 AFM without cable. Has one of the bolt holes broken for the mounting of the filter but shouldn't be too hard to make a braket to support it. These go for $150 second hand so $75 with the broken part.

post-40739-0-13015000-1325498226_thumb.jpgpost-40739-0-15655700-1325498283_thumb.jpg

Walbro fuel pump GSS342 255lph. $80 Fitted with Nistune in March and has done the same 3 or 4 track days.

post-40739-0-54764000-1325498782_thumb.jpg

RB26 fuel pump A42-T44. $80.

post-40739-0-76630200-1325499147_thumb.jpg

R32 GTST fuel tank with filler, straps,sender and original pump if I can find it. $50. Gone to fuel cell. No picture at the moment but I am sure you can figure out what it looks like!

All parts are in Hemmant, Brisbane. Willing to post anything other than the fuel tank at cost.

Best to call or text 0414 236 724 but I will try to keep an eye on the thread as much as possible.

Link to comment
https://www.sau.com.au/forums/topic/387061-r32-upgrade-nistune-and-other-parts/
Share on other sites
just_racing Collaborator

just_racing

Posted
  • Author
Posted

What condition is the inside of the tank?

Sorry I missed your question.I think the tank is fine. I was usig it up to just recently and no fuel issues.

All other parts still for sale!!

just_racing Collaborator

just_racing

Posted
  • Author
Posted

ECU sold. All other parts are available. Taking offers.Want it all gone.

Put a hole through a piston on my RB20 so I have upgraded for my next build. I have some good budget parts to get your RB20 going harder.

I am negotiable and will do a good price if you want to bundle it up for a package deal.

R32 GTST ECU with Nistune fitted. Looking for $600. Was fitted March 2011 and has done only 3 or 4 track days.

post-40739-0-52096900-1325497287_thumb.jpg

6 x RB26 injectors. $200. Bought them off another member but never fitted them myself. I was told they were working when they came out. You will need to add a resistor pack to use these in the RB20 but there is a whole thread on how to do this.

post-40739-0-42458500-1325497743_thumb.jpg

Z32 AFM without cable. Has one of the bolt holes broken for the mounting of the filter but shouldn't be too hard to make a braket to support it. These go for $150 second hand so $75 with the broken part.

post-40739-0-13015000-1325498226_thumb.jpgpost-40739-0-15655700-1325498283_thumb.jpg

Walbro fuel pump GSS342 255lph. $80 Fitted with Nistune in March and has done the same 3 or 4 track days.

post-40739-0-54764000-1325498782_thumb.jpg

RB26 fuel pump A42-T44. $80.

post-40739-0-76630200-1325499147_thumb.jpg

R32 GTST fuel tank with filler, straps,sender and original pump if I can find it. $50. Gone to fuel cell. No picture at the moment but I am sure you can figure out what it looks like!

All parts are in Hemmant, Brisbane. Willing to post anything other than the fuel tank at cost.

Best to call or text 0414 236 724 but I will try to keep an eye on the thread as much as possible.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...