Jump to content
SAU Community

Recommended Posts

Sorry to be a stain and make so many threads but I wonder a lot and I get asked questions, "Why aren't you doing this", "Wouldn't this be more economical/powerful". My question is why is the CAI placed behind the front headlight, shouldn't it be placed in a clear line of air rushing past the vehicle. An idea thrown at me was creating a metal box around the CAI and placing in the direct airflow near the body kit somewhere or putting a small hoodscoop on to provide more air rush to the CAI. I'm sorry if my words of description are silly but i've been asked by others around this topic.

Link to comment
https://www.sau.com.au/forums/topic/387406-rb25-na-position-of-cai/
Share on other sites

there's no outright correct way to do a CAI, behind the headlight is just usually the cheapest because that's where most factory air-box's are. A good CAI needs to be in a position where gets can get descent airflow and cold ram air. This can even be achieved with a rear facing intake like in a induction hood, which makes use of the air piling up on the windshield creating positive pressure. which is how the old school NASCAR's use to run, when they used factory car's like the camaro back in the 60's and apparently was good for 15-20hp when you were above 150km/h. but that is not as efficient as the front of the vehicle.

the power increase will never be great but the main reason you should do a cold air intake is so the engine doesn't get hot engine bay air and increase the likely-hood of pinging and such. especially with turbo cars because the act of compression of the turbo's increases the air temp, and this is compounded when the air is hot to start with, just compare driving your car in summer and winter.

but mainly just give the engine cold air who really cares where it comes from.

Ah okay, this may be taking it off topic a bit because the topic has been answered quite simply, I have read many threads on turboing a N/A, but can I get someone clearly here to right

All out price:

Needed parts:

Wanted parts:

I just want a round about idea, I am sitting on not much money at the moment but I just want to know prices and pieces needed clearly. Also is it worth looking into supercharging a RB25DE? brother wanted to know because he thought it may be more simple then turboing it, but in threads i've read it's harder.

Thank you very much

Edited by Brendonams

Yeah i've seen on ebay half cut skylines for a RB25DET for 3k, what do you think about them?

yep, the half cut could be the way to go . . you then have a motor designed for boost and (if fitted by a mechanic) a warranty. . . . do your maths first , as others will tell you, its cheaper to buy a turbo powered car in the first place . . . i paid 3k for my 32GTS-t with mildly modded RB20DET, quick enough to get you into trouble real easy

Blowers are legal

yeah, no.

as for CAI's, don't bother spending too much money on it as the gains are minimal (mostly in the drivers head). on a modern car that already has a bit of a CAI from factory, the gains are only a matter of a few kws. in a lot of cases i wouldn't be suprised if there is no gains.

Not in Tassie (Hole) yet ;p, I mean they're bringing in laws soon so we "Catch up" with the rest of Australia but still atm you can drive forced induction cars no HP limits, v8's there are actually no limits for power.

Haha I'm only 16 and it was kind of my first car xD, trust me wont be the end to my skyline family in the future I will (Hopefully if not dead) be driving a forced induction with a turbo loud enough to scare any cat from the road .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...