Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

This thread is interesting to me as I fill with optimax as there is a shell 10 doors down from my house, however I do occasionally use the bp stuff if I am shopping or whatever as there is no shell there.

To be honest my car needs a damn good tune anyway but I definately get better economy from the optimax.

A couple of you guys mentioned optimax as being 92 ron fuel to begin with and then modified somehow to acheive the 98 RON whereas bp and Mobil are refined at 98 RON from the beginning.

Can one of you please supply me or post here if you wish your reference for this information. Because if the Shell issue is a concrete fact I wont touch it again.

is there any problem with mixing fuel?

when my gf takes my car out she insists on filling it with caltex vortex fuel, but i will always only put BP ultimate in.

i did find that my car's exhaust would pop while accelerating at high revs and lately it hasnt been doing that. im not sure if its the better fuel or maybe just the cooler weather

Guest two.06l
is there any advantages in running BP ultimate and octane booster? will it increase the octane rating or not, im thinking about only using it for when i take my car to the drags

get the most out of your octane booster by getting it your car tuned with it in your tank

Problem with that though is without the octane booster the engine will ping at high revs. You want to tune the car with what you will be using. Like I said my car was tuned with Mobile and like most guys who have done this find their cars either run like shit with Shell or in some cases ping like mine :D

Hi Guys, I think you need to check out your local supplies. Just because it says "Shell" on the servo doesn't mean that all the petrol sold there came from a Shell refinery. In Qld, WA and SA, Shell don't have 98 octane enabled refineries, so my understanding is they buy it from BP. Being Kwinana in WA and Bulwer Island in Qld. In NSW and Vic it is the reverse, the refinery at Clyde produces something like 25% of Australia's total petrol and the Geelong refinery produces about 50% of Victoria's petrol.

So my understanding is;

In Qld, WA and SA all Optimax and Ultimate is refined by BP

In NSW and Vic all Optimax and Ultimate is refined by Shell

I don't know about Caltex/Ampol, but you can find out by calling the local refinery and asking.

Bottom line, I don't think you can say that Optimax is this and Ultimate is that, it really depends on from where it is sourced.

guess it's all part of the marketing con.... u're buying BP being sure you get diffrent fuel from Shell, in fact BP & Shell has an arrangement to have all BP fuel done by Shell...

so what's the difference.... just go buy any fuel, it's like tax, you can't afford not to pay for it and still getting the same juice.

Hi Bez, Taree hmmm, I would say your Optimax would most likely come from the Shell refinery at Clyde, so it is "real" Shell petrol. Any further north and you might get "Optimax" from the BP refinery at Bulwer Island, so it wouldn't be real "Shell" petrol. I have never had a problem with Optimax from Clyde. Since Clyde is the source of the V8Supercar control fuel it can obviously produce "good" Optimax.

I would say, ignore the comments from guys in other states that get their Optimax from different refineries, some of which aren't even Shell.

Shell doesn't guarantee the 98 octane do they like bp does?? I was under the impression there was only one refinary for optimax and that was down south (clyde). I didn't think WA had optimax and i was told by a shell operator in qld when they ran out that it was because of the refinary down south not being able to supply enough for everyone. That refinary is the sole optimax supplier to my beliefs. We've got 2 or 3 oil refinaries in brisbane. One is bp and the other was caltex and i think there maybe a 3rd which is jointly owned by neumanns and morland energy. A lot of the refinaries are getting their fuel from overseas at the moment.

As far as I know, its a fact that BP Ultimate (who use the best Western Shelf Crude Oil) refine their fuel to 98 octane, where optimax is like putting a bottle of octane booster in your tank.

I have it on good authority.

I don't use the crap.

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...