Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different. Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality. Whilst on BP98 in adelaide knock was rarely over 20. With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120! Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low. There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in! I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different.  Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality.  Whilst on BP98 in adelaide knock was rarely over 20.  With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120!  Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low.  There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in!  I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

Hi Sly, in Adelaide you got Ultimate from Kwinana, arguably the best refinery in Australia. Made from NW Shelf crude, arguably the best in the world outside Saudi Arabia. When you come to Sydney you get Optimax from Clyde arguably the worst refinery in Australia, not that Geelong is much better. Made from Bass Straight crude, also arguably the worst in Australia.

There is ongoing capital expenditure at both Clyde and Geelong, aimed at fixing their consistency problems. Plus they simply have to, because of the emmisions demands. From what I can tell, if the 2005 standards where applied now, they wouldn't be able to sell Optimax. Too much sulphur, for one.

Ask the high performance 2 stroke guys (bikes and karts), their engines give fuel a real work out, that's why they use Elf. Not only higher performance from a superior formula, but consistent quality as well. You get what you pay for.

i see alot of people have trouble with optimax, i have run my car on optimax for a month now and car is running great not missfiring or anything. i tend it hard to find bp ultimate around my area. i have used it once and it felt the same as optimax. as for mobil my car runs like shit on it

I am yet to find a Japanese import with stock ECU run better on Optimax than BP Ultimate, one thing I have noticed with Optimax is, it gives the greatest amount of K's per litre. (R32 GTSt, R33 GTS25t, R33 GTR, Forester S/tb, Legacy GTB, GC8 WRX, Pulsar GTIR all seem to like BP Ultimate, and Mobil Synergy 8000 best.)

I work in a motorcycle shop in Rockhamton and the first thing we say to a customer when they ask what fuel to run in their bikes is DONT RUN OPTIMAX then followed by what fuel is suitable. The fuel is heavier and thicker and it fouls the plugs very very quikly this goes for all bikes and jet skis. many a time have we had someone come in with a fresh full tank of optimax wondering why their bike stopped working. :bonk: I guess it might not matter in a car becuase the sensors might pick it up and the ECU would a adjust the mixture in some way. It also turns your plugs a funny colour aswell i guess thats because of the type of chemical used to boost the octatane. Pity you cant run good ol avgas in your cars becuase you cant beat it :D

by the way, i dont notice any power difference or poping in my exhaust using optimax, however i do find i get more k's from a tank of ultimate..

and on another note, Synergy 8000 (or whateva it is) and BP ulitmate are the SAME! they come from the same refinary, from the same tanks and often from the same trucks. its not unusual to see a bp truck in the Mobil on the pacific hwy. and i think the one on epping road too...

my 2 c...

Hi guys. I work in the oil industry so know a bit about it, but not too much on the additives in refining. In sunny WA, the BP Kwinana refinery supplies all fuel to all outlets of all other brands - they are the only refinery within a coupla thousand clicks, so that would seem to make sense! But they just sell raw refined product to the other guys. Shell, Caltex and the rest add their own recipes of additives to produce their "own" fuel. BP may, depending on the contract, add some basic additives for some buyers. Being selfish, money-grabbing capitalists, BP don't sell their 98 octane Ultimate to anyone else in WA - especially not Shell!! So Shell have to make do with a raw 95 octane product, which they chuck a few things in to give it the yellow pecten touch :thumbdwn: .

As for the NW Shelf crude being wonderful stuff, you have to be careful which field you are talking about! Most production currently comes from the Wanaea & Cossack fields (operated by Woodside) and the Griffin field (operated by BHP Billiton). These produce a nice, light crude ;) (quite different from each other, but not dissimilar to Arabian Light), which fetches a good price on the spot market. The Wandoo field (Exxon Mobil), Stag (Apache), Legendre :dump: (Woodside) and a load of smaller fields (ChevronTexaco and Apache, mainly) all produce crude ranging from nice, light crude :aroused: to thick, 'orrible, gungy stuff that is not exactly the refiners dream :throwup: . Then their are the Timor Sea fields, including Laminaria (Woodside), which produces a crude that you could put straight into your diesel motor and run it with no problems. In refining terms, you can produce a high octane cut from any crude, but you will have to work harder with some than others and your yield will vary depending on the feed stock. Refiners are always trying to plan the mix in their feed stock tanks, and hence the stuff they are buying (often when it is on the high seas), so as not to have to change operating parameters too much in the crude distillation units.

So BP Kwinana will be buying crude from all over, as will the Eastern states refineries. And they will try to buy stuff that they are set up for, without being raped on price on the spot market.

Meanwhile, given that it is the only 98 octane fuel available here, I use BP Ultimate. And it still gives me black crap on the back of my white car! (Just wait until I get an S-AFC!

Hope this helps. Interesting thread!

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...