Jump to content
SAU Community

Recommended Posts

Attending

Richo

Chris M

Chris S

Rob

Paul

Kat

Mariowintonlogo.jpg

AUSTRALIA DAY - JANUARY 26TH TRACK DAY

Hope you all had a great Christmas, once again, another Tampered Motorsport Track day is coming up. Thursday January 26th is the date, and once again at Winton Motor Raceway. Celebrating Australia Day at the race track is generally very enjoyable, and the weather is usually fantatic.

So the details of the day are……

Entry Fee: $160 Including Electronic Timing

Spectators are more than welcome, and there is no cost to come and watch. Also you can go for a ride in the cars but you must sign on with a Passenger indemnity first. Due to the amount of passengers at previous events our insurer has put a small levy on passengers of $20. You can just pay this when you sign the forms at the Scrutineering office.

The day will kick off when scrutineering starts at 7:30am. You will need to do your paper work at the scrutineering office before you have your car checked. Please make sure you have removed all loose items from inside the car.

YOU WILL NEED:

Long sleeve and long pants of non flammable materials i.e. No Nylon

AASA license which can be bought on the day for $50 (these last for 12 months) or CAMS L2S

Closed footwear

Helmet that complies to Australian Standards (has ASA or Snell Sticker)

Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure.

Good condition tyres

Working seatbelt (give it a pull and make sure it locks)

All people wishing to attend need to make payment to the specified bank account. When you send your email with your details you will be sent an entry form as well as payment details. You will need to email the following details

Full Name:

Email Address:

Mobile Phone Number:

Car Make & Model:

Colour:

Capacity:

Previous best time at Winton:

Forum/Workshop/Car Club you are a part of: (to be listed on Timing Sheet)

SO IF YOU ARE WOULD LIKE TO COMPETE EMAIL YOUR DETAILS TO

[email protected]

Cheers,

Adam

Link to comment
https://www.sau.com.au/forums/topic/387783-tampered-winton-australia-day/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Conservative 1.42.x

With the AO50's 1.40.x

Evo's lap pretty quick out of the box around Winton, generally.

Tampered generally have 4-5 groups, sessions are 15mins (too long imo, but anyway). There is generally a group assigned to a forum or car club.

Like MelbS15 had a group to them selves, Chasers did the same I think.

Passenger laps all day make for great fun.

Tampered generally operate over the public holidays.

Pitty about the clutch. Tyres, long as they have tread are fine. Nanganks are still fun!

WRX club days, which SAU VIC piggy back our days, hold an event in most months.

Tampered generally operate over the public holidays.

Pitty about the clutch. Tyres, long as they have tread are fine. Nanganks are still fun!

WRX club days, which SAU VIC piggy back our days, hold an event in most months.

I have 50% potenza's on ATM. Still probably better than Nangs lol.

Looked at the SAUVIC club thread. How often do you members get out on the track for the members only stuff? Really only bought my GTR to use as a club car/rare weekender, really wanting to join a club.

I have 50% potenza's on ATM. Still probably better than Nangs lol.

Looked at the SAUVIC club thread. How often do you members get out on the track for the members only stuff? Really only bought my GTR to use as a club car/rare weekender, really wanting to join a club.

Not much is better than nangs...ha. Potenza's above the tread indicators will be fine.

Their is basically a track day every weekend, if you become a member and get a CAMS license you can enter most other clubs track days.

There are generally 2-3 social events a month in Summer.

Sounds good mate, I'll get my clutch sorted and join up.

What's the go with noob's? I have raced karts before but I'd still like to go through the whole noob beginner thing because you can never get to much info. Do most of the track days have a beginner tutorial style run?

Ben

Hey guys I've sent the email through to compete.

Is anyone meeting Wednesday morning to cruise up together?

Thursday Morning, Wallan BP Outbound @ 6AM

looks like red bus will be there

with two car hopefuly

Please let us hear the GTR at full noise!! Hope all the niggles are worked out.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...