Jump to content
SAU Community

Recommended Posts

My car was hit when it was parked, the driver left he's details on my windscreen so I called him up and he gave me the claim number, but when I called AAMI up they wherent very helpfull, they said we haven't approved it yet?? So the driver of the other car called them back to see why, they told him they wher going to fix my car. But when I called them t hey gave the same distant attitude "we haven't approved it yet"

My insurance company won't chase up the matter because my policy is only third party, and a third party policy is for fire and theft only...

The guy that hit my car seems pretty reasonable, is there anything more he can do?

What are my options? How can I get them to pay??

I thought 3rd party insurance only covers the bill for the other vehicles not your own hence the fire and theft only....but if old mate ran into u his insurance company should cover the repairs to your vehicle

like he said, yours wont do shite, you have to chase it all up and make sure his insurance figures it out. go get some quotes for the repairs and hand em to old mates insurance company.

this is a really good reason to have comprehensive, that way they do all the work.....well most of it

I fully advocate comprehensive third party. If I didn't have full third party, I'd park my car up.

Then probably have it hit by somebody anyway, which seems the case with you. (I'll give you the benefit of the doubt and pretend you weren't driving around without it.)

To start with, I'd call them up (AAMI) again for a few reasons. Firstly, make sure they are fully aware you're in contact with the owner of the other vehicle and that he has informed you everything is in order. They should be able to tell you more than "Not approved". Especially since he can.

On that note, I'd also be asking them what the time frame was to have your car fixed. Quotes as Boiracer suggested is also a good idea, simply just to have that knowledge for future reference.

Let us know how you go tomorrow anyway. There is no reason AAMI shouldn't be helping you out A.S.A.P.

There is a governing body that oversees the way insurance companies behave > Financial Ombudsman Service Ltd GPO Box 3 Melbourne VIC 3001.

...and Local call from anywhere in Aust 1300.780.808

Insurance companies must abide by the body's decision to resolve a dispute.

  • 2 weeks later...

Regardless of what his insurance company says or does, it is on him to be paying you out as he was the one who hit you, therefore legally required to make amends. If insurance company is unwilling to resolve in a timely manner, get quotes on repairing your car and ask the guy to pay for repairs himself and have the insurance compny reimburse him...let him deal with "approval" or "non-approval",

Why are you even talking to your insurance company ? He hit you, he is at fault, he makes the claim for both cars through his insurance. You talk to his insurance company not your own. Or did I read that completely wrong ?

Terry, I don't think the Ombudsman will get involved until it reaches the completion of the IRR stage.

I would get two quotes and then send AAMI a Letter of Demand for all your losses asking for payment to fix your car.

if you arent happy with AAMI's response, you ask to speak to a manager, if they say no, ask them they need to inform you of their internal dispute resolution process.

each insurer has this and they have to advise you of this if you are not happy with a situation.

they'll then have 10 days from memory to get back to you.

they have to inform you each part of the process, and if any delays, and expected time frame.

just because they arent your insurer doesnt mean they shouldnt help.

they have taken on a risk and that risk has caused loss/damage to a third party = you. so they should accept if all liability points to it. (I imagine it would as he has legft a note)

with the IDR process, iif by a certain time fram there is no result, then it goes to the EDR (external) and thats where the FOS gets involved as per Terry's post.

good luck with it.

also,

perhaps on next renewal with your insurer, or when car is repaired get a quote for full comprehensive instead of third party.

would save this hassle.

(they prob wont do it now as car has pre existing damage)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...