Jump to content
SAU Community

Recommended Posts

just gunna leave this here .........na 6 banger vs 32 turbo sorry lol, good on trav for getting it down the 1/8th at tailem bend on the weekend ....anyone own the 32?

http://s219.photobucket.com/albums/cc22/traveb6/?action=view&current=19022012132.mp4

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Hi Martin, when are we going to see the willall stable come out to play?, surely Mr Wilson is getting itchy to play.

We may bring the 35 out at some stage when its full track just to 'see'. RH9 is retired from drag racing though. Its not coming back out.

Dont let my lack of enthusiasm stop you though! It looks like a doddle to run a fairly stock R32/R33 GTR into the 10s these days, and if you put the right tyre under it a GTS-t shouldnt be much further behind. Plenty of folks in manual Commodores pumping in the 10s with dyno cards in the mid 300s, so the superior rear end of the Nissan puts it well within reach.

When it comes to drag racing your average street performance car there's almost no comparison between a 200 odd kW AWD Evo X with slick auto transmission and a 250-300+ RWD Skyline, particular if the Skyline is a 5 speed manual.

Read what I wrote again - its all in the 60. That has - always been the way.

Dyno numbers mean very little on street cars on the drag strip, particularly when most of the turbo Falcons getting around with 400+rwkw are really only spinning 330 or so :pirate:

yeh he put the 3.23 diff gears in did a 1.6 60 ft thats moving for a barge 7.40 and a 98mph for a half track is doing well runnin a 380 on the disney about the money for 98mph half track :happy: going a pulley and going to be the first to push the non cooled situation and around the mid year with low temps i reckn he will bag it, gotta love power vs $$$ mind u why do we bother being tight :teehee: lol

was reading an old article u did in boost mag and it was on anti lag system simon had made up from morpowa on his [no gas] beast how much of an effect is to be had in an anti lag system in any car's 60ft , i know its a bit off topic but in the drag related section, and dammmm simon looks young lol :laugh:

yeh i know its old tech how far did it ever elvolve to .....a point where a manual could be used for boost off the line in a good way or just damaging to everything in the drive line?

awd is for homo's that can't power skid point and steer is a bit boring unless theres a on off control via flick of the trac control button ? got that figured out on the 35 yet it would be nice

what options are there for the skyline for boost off the line in manual form?

Read what I wrote again - its all in the 60. That has - always been the way.

Dyno numbers mean very little on street cars on the drag strip, particularly when most of the turbo Falcons getting around with 400+rwkw are really only spinning 330 or so :pirate:

That was my whole point; AWD and idiot proof launch capability. If you've got the grunt to run 11.9 the SST Evo X will do it, even with your Granny behind the wheel. Put dear old Gran in the powerful RWD and unless she is related to the Bray family she's got buckleys of achieving 11.9.

yeh i know its old tech how far did it ever elvolve to .....a point where a manual could be used for boost off the line in a good way or just damaging to everything in the drive line?

All the AWD cars that you see us race will make boost on the line via various launch control subroutines in the ECU. My STi will hang around 1.0 bar stationary if requested, while RH9 could go well beyond that if need be.

Because these cars grip and go - rather than flail around axle tramping - its uncommon to damage anything.

This is all pointless in Commodore/Falcon turbo as in manual form their rear end geometry is that poor stopping them from axle tramping and twisting, snapping, bending everything in the driveline is almost impossible.

That was my whole point; AWD and idiot proof launch capability. If you've got the grunt to run 11.9 the SST Evo X will do it, even with your Granny behind the wheel. Put dear old Gran in the powerful RWD and unless she is related to the Bray family she's got buckleys of achieving 11.9.

Having driven a manual RWD into an 11 and an SST into an 11, I can tell you the kind of timing and driving input required to get either job done isnt that different. Obviously some of us have more talented Nannys than others.

All the AWD cars that you see us race will make boost on the line via various launch control subroutines in the ECU. My STi will hang around 1.0 bar stationary if requested, while RH9 could go well beyond that if need be.

Because these cars grip and go - rather than flail around axle tramping - its uncommon to damage anything.

This is all pointless in Commodore/Falcon turbo as in manual form their rear end geometry is that poor stopping them from axle tramping and twisting, snapping, bending everything in the driveline is almost impossible.

i think this is the most valid point cheap cars just arent set up for that kind of abuse where as the decent dollar euro/jap/germany built cars handle the power and launches much better ................bugger for the auz built donkeys :pirate:

fanks for the replys :cheers:

  • 6 months later...

Yup

Heard the latest with andra rules?

Run faster than 12.99 and get a 4 point harness and tailshaft loop or GTFO

Rang reno yesti and sooked

Didnt help one warning the go home so for 160$ u get 2 runs

Yup

Heard the latest with andra rules?

Run faster than 12.99 and get a 4 point harness and tailshaft loop or GTFO

Rang reno yesti and sooked

Didnt help one warning the go home so for 160$ u get 2 runs

thats just shit. rules are getting worse and worse and cars getting better, where is the sence in that

nup no refund

u get 1 pass if ur mph is to high or time to low they will warn u straight up

2nd pass if go again ur out c u later

reno is a top bloke and i spoke to him to at length yesti he said look come down have a pass see where ur at, run it agian and roll in at 3/4 track ,I said hold up whats the phucking point in that ? he said iknow i know iam on ur side its just andra holding us to it now

i said cant u just bin andra or change the rules? he said been at them the last 3 months with rule changes to suit new cars that can do a 12.99 with just an edit or flash tune . andras response to rule changes are shocking , stuck in the 70's , but reno is trying his hardest as hes the bloke putting his ballock on the line still for the sake of us !

as far as binning andra ..............its in the making , trying to secure the same insurance holder thet heathcote park has

( heathcote has next to no rules stick a v8 in a shopping trolley for all they care )

so were in a rock and a hard place, but for the sake of having racing in s.a ill still spend the $160 for 2 runs , just means if u feel uve funbled the launch just roll it through and have another go and every shot it has to be the money shot.

iam in a crappy situation my self , nearly all my driveline in hanging on by hopes and dreams and i really wanted 2 shots to have a easy take off so i could see my mph ( easerly in the 12.99 bracket with soft take off)

now i just have to go for it ........................but thats racing and i suppose we should be lucky we still have racing in s.a

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...