Jump to content
SAU Community

Recommended Posts

Hi guys

Need some help/advice with my r33 gtst.

Basicly my AFM's keep dying after few hours of driving. I had 3 pink label afm's put 1 in, it would run good for a few hours then die. Drove from morley to birba lake put the car on the dyno for a run and the car made 220bhp with the car f*king up. Switched the afm again put the car on the dyno and pulled 278bhp. Cars mostly stock basic mods fmic exhaust and 10psi of boost. AFR on first bad run was around 10-10.5. AFR on good run was up around 12, All afms were just standard pink labels.

Link to comment
https://www.sau.com.au/forums/topic/389097-r33-air-flow-meter-problems/
Share on other sites

Are you sure its not a connection or something else?

1 not working - yep

2 not working - you got poor luck.

My experiance is that the either work or they dont (one the car is warm) so even stranger that its ok for a few hours then goes bad. Happy to be corrected on that.

Find someone that has a working unit, try it and if it still happens you know it something else causing the problem.

Cool Story:Personally I have had them stuff up too. It still worked unless u put your foot down and then would read so incorrectly it caused a boost cut, extremely wide range of idles depending on weather or car would be lacking in power for no apparent reason and lurch! Purchased a second hand unit from here.. guess what.. just as faulty. Purchased a unit from JPC, problem solved and never returned.

Fix:

1 - Check your wiring for the AFM is not shorting out or is damaged between your ecu and afm. Run a direct temporary wire (if your ok with wiring) to test this.

2 - Try an AFM with a guarantee that it works!

  • 10 months later...

still COULD be coilpacks, have them bench tested before you rule them out. especially if they're chinese copies, normally splitfires are pretty good though

ive personally had a brand new aftermarket coilpack fail, so it is possilble

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
    • Hey guys,  Way back when (about 15yrs plus), I picked up a beautiful set of Tein 'Super Racing Spec Circuit Master RE' coilovers from Russman. I have legit never fitted them to my car, as it was garaged indefinitely while i bought a house Yada Yada. They look brand new! Anyway its time to pick up where I left off, and have started doing some khanacross and am booked in for a hill climb next month. The car has some hard af Nismo shocks in ATM, which has me wanting to upgrade again, and now I am left wondering if it's worth having these teins rebuilt? I think they where an ok shock back then, but how do they compare to what's on the market now?  Shockworks/mca are 2800+, and I am sure they are great. But if I can have these rebuilt and be better than, say, a set of bc's for around the cost of bc's, I would be happy with the performance v cost trade off.  If they are considered outdated and rubbish these days, so be it, I'll put them on the shelf and be happy to look at the pretty green colour while I save for the SW/MCA option. Grateful for your thoughts on the matter, and suggestions on who could do the rebuild if it's a worthwhile pursuit.  cheers, Rowdy. 
×
×
  • Create New...