Jump to content
SAU Community

Recommended Posts

Ok, i did a quick search for the same problem, but i couldn't find anything.

I have an odd ticking noise coming from my engine bay, it's irregular, and only happens when im idling. it's coming from the drivers side of the engine bay. i'm fairly certain i have a dodgy AFM, and my only theory is that it's playing havok with the injectors so they're turning on and off randomly or whatever injectors do at idle. the idle does jump around slightly, between 700 and 1200, but usually sits around 700 - 800. it goes away as soon as i rev it and never happens while driving. is there anything serious that could go make that noise on that side of the car? it's sort of like an electronic ticking like a solenoid going spastic.

anywho, any help appreciated.

Link to comment
https://www.sau.com.au/forums/topic/38937-random-ticking-noise-in-engine-bay/
Share on other sites

nah oil is fine, it's an electrical ticking noise, like a solenoid clikcing on and off at random intervals. whenever my idle is playing up is when it happens. if the idle is being a good boy on that day it won't do it. that's what led me to believe possible injector problem.

Interesting... I had a ticking noise., but it happened all the time... I found it out to be the electric window switch was playing up, when i put my window down, the switch would stay partly on, and it would tick (ie a solenoid). I've figured out aslong as i make sure the switch is off after i put my window down its fine... Probably not wat ur problem is, but thought it was worth a mention.

one solinoid that is fairly loud is the vvt solinoid which comes on as soon as there is movement of the throttle, your tps (throttle position sensor) could be dodgy and kicking the vvt solinoid in and out.

just a thought

this sounds like my problem, thanks dude. i'll have to get my TPS checked out.

If you have a dodgy AFM then there's a fair chance the idle's jumped because the ECU's in limp mode. Dodgy TPS shouldn't cause the idle to jump - I think the ECU resets its throttle reading when you start the car, ie it makes whatever it's reading then as 0% throttle.

I have the exact same ticking noise on my car. It's a worn lash adjuster. Nothing to worry about, just annoying. The reason it only ticks at or near idle is because that's when oil pressure is at its lowest, and if the adjuster is worn it'll return the oil more quickly than it should and so 'bleeds' itself. Think about trying to blow up a balloon with a small hole in it. If you only blow a little bit, it will stay flat. It you blow harder, so that you're putting in more air than the hole is letting out, the balloon will stay inflated.

Different oil doesn't fix it - well maybe something like 80W90 would, but that's not a good idea :rant:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sane enough. Remove the roof liner, because the acid will go everywhere.
    • Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...