Jump to content
SAU Community

Recommended Posts

Ok my journey thus far...

I've been looking at getting a genuine Nismo stripe kit (side stripes, bonnet stripe) for my GT-R - the only problem is that Nismo stopped producing them a while ago, so they no longer sell them.

Having trawled through some very crappy looking eBay specials and ruled them out immediately (I wanted original), my journey led me to a guy from GTROC UK who had the original Nismo stickers on his car.

As it turned out, he'd had a front quarter panel replaced at one point (like in about 2005), so he got a sticker guy in the UK to take exact measurements of the factory design still in tact on the opposite side of the car and replicate it. Interestingly enough, the quality of the new stickers was better than the originals so they ripped the Nismo originals off the other side and replaced them.

I got in touch with the sticker guy who amazingly still had the design on his computer, so we started talking the sphincter of the universe (WTF! I wrote turk3y!). Originally wanted a fairly hefty chunk of coin to send me a set over, but he's agreed to a fairly hefty price reduction down to GBP300 (around $450ish) plus postage if I can round up 4 other interested buyers. That includes both sides, the bonnet stripe and the Nismo bonnet logo.

Given that this is the closest I'm probably ever going to get to the real deal, I'm in. Do these float anyone else's boat, or am I barking up the wrong tree?

Pics of the kit on the other bloke's car:

i206475597_27694.jpg

i204833596_39778.jpg

i206484576_8926.jpg

Edited by Iron Chef

I recently ordered a set of nismo s-tune stripes for mine from

http://www.acromann.com/product_info.php?products_id=234

They're obviously not genuine, but they look reasonable. I haven't got around to putting them on my car yet, I wanted to get a professional to apply them to ensure it was done right.

Different slant:-

1) if a car has a body colour that is prone to fading eg red

2) if the car has a very thin coat eg N1

3) if the car is parked outside for long periods

...might it be inadvisable to procure such a Nismo Sticker Kit regardless of whether or not it's genuine or an exact copy, lest one day the stickers in whole or in part are removed

a) due to an accident to panel/s

b) new buyer not wanting it

c) rarity of a replacement of a section due to scratching or peeling

....& leaving behind, patchiness in the paintwork???

Quote December 2011:- "But they look good!" Jim Richards

If you want to buy a little more localy you could try Steve from Wrapture Styling in Brisbane. He did a set in Blue/Black/Gray for one of the guys in the Qld club who has a 4dr 34 GT-T. Not sure what it cost but it couldn't hurt to ask.

gallery_65273_3399_270334.jpg

Just to clarify, the stripes were originally made to suit each model. I can get genuine Nismo ones for another vehicle and trim them down, but they wouldn't look right in my opinion.

Same applies for the Acromann ones, don't want generic length ones.

Boz, the side stripes look pretty good but the bonnet stripe is the wrong angle and the wrong length. (Sorry I'm a bit anal like that...)

Terry yes you are correct, my sticker guy (in Oz) recommends changing them every two years to stop the stickers breaking down and eating into the paint, especially if the car is regularly exposed to sunlight.

Edited by Iron Chef
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...