Jump to content
SAU Community

Skyline R34 Boot Lid Chrome Letters

shehris

By shehris,
in Exterior & Interior Styling

 Share

Recommended Posts

Ty1 Experienced

Ty1

Posted
Posted

hey mate, i have an r33 coupe and ended up getting a r33 4 door rear garnish as they have the silver 'skyline' letters on them whereas the coupe garnish is colour coded. I'm pretty sure this applies to the r34's as well. all i did was pop off the letters and stick them directly over the top of the letters as I prefer the look of the chrome letters. I just had a quick look on ebay and looks as though you would need to purchase the entire bootlid to get the letters which could be a bit costly so maybe you could try spraying or sticking chrome overlay on the letters. just an idea

shehris Contributor

shehris

Posted
  • Author
Posted

Thanks Mate, here's what I'm after (see attached image)

I've been searching eBay, Alibaba, Amazon and hells knows what without any luck. Appreciate your help.

hey mate, i have an r33 coupe and ended up getting a r33 4 door rear garnish as they have the silver 'skyline' letters on them whereas the coupe garnish is colour coded. I'm pretty sure this applies to the r34's as well. all i did was pop off the letters and stick them directly over the top of the letters as I prefer the look of the chrome letters. I just had a quick look on ebay and looks as though you would need to purchase the entire bootlid to get the letters which could be a bit costly so maybe you could try spraying or sticking chrome overlay on the letters. just an idea

post-65964-0-23479800-1327744057_thumb.jpg

StevenCJR31 Veteran

StevenCJR31

Posted
Posted

Hi Guys,

Let me know if any of you can help me. I'm after the whole chrome SKYLINE letters on R34 rear boot lid.I've been searching through wreckers and online without much luck.

Cheers

have you tried NISSAN spare parts?

iwanta34gtr Grand Master

iwanta34gtr

Posted
Posted (edited)

looks as though you would need to purchase the entire bootlid to get the letters which could be a bit costly so maybe you could try spraying or sticking chrome overlay on the letters. just an idea

They are on the rear bumper for an R34.

If you put a post up in the WTB section, maybe someone on the forums can help you out. Or try a few more local wreckers. Where are you located, I know of a few spare parts places in Sydney that may be able to help you.

As Steven said above, if worst comes to worst, you should be able to order them new from Nissan. (But as with anything direct, get ready to bend over when you see the price)

I actually have the S and Y and the E kicking around somewhere, but they wouldnt be much use to you as they obviously arent the full set. I found them in the boot of one of my GTT's while cleaning - the previous owner had removed them for the 'clean' look.

Edited by iwanta34gtr
iwanta34gtr Grand Master

iwanta34gtr

Posted
Posted

Also important to note that the series 1 and series 2 R34 chrome letters are different.

Series 2 letters are smaller and closer together, so bare this in mind while searching.

Hope this helps, good luck with the search.

shehris Contributor

shehris

Posted
  • Author
Posted

Thanks guys this helps, I am in Sydney and have been searching through some wreckers but so far without luck, let me know know if you have some shops in mind specifically. Some weeks back some one also told me to check with Nissan but told me that it may cost a fortune so I haven't checked with Nissan yet.

Cheers

1327755587[/url]' post='6208243']Also important to note that the series 1 and series 2 R34 chrome letters are different.

Series 2 letters are smaller and closer together, so bare this in mind while searching.

Hope this helps, good luck with the search.

shehris Contributor

shehris

Posted
  • Author
Posted

Thanks Mate, Just bought the whole SKYLINE from this guy for $20 bucks!

Now off to get some badge adhesive.

Cheers

Try this guy - 0410 069 096.

I've bought a few things from him previously.

He is at Wetherill Park, can be good for some stuff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      RB25DET Series 1 & Series 2 Gearbox Identification

      By MBS206 · Posted

      He should do an LS7 too...
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • sunsetR33
      RB26 turbo oil banjo bolts

      By sunsetR33 · Posted

      Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Dose Pipe Sutututu
      RB25DET Series 1 & Series 2 Gearbox Identification

      By Dose Pipe Sutututu · Posted

      Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
×
×
  • Create New...