Jump to content
SAU Community

Recommended Posts

This topic isnt about a Skyline, but rather about another make, a smaller vehicle produced by Mitsubishi that has rolled out of the factory and with a few mods is now making a very respectable 458 kw atw's... (615 whp)

I have talked to a few people around Australia in my short time ive been here, a Few tuners as well. There is alot of debate about what is good power, and what's possible and whats not. Quite recently I was having an argument with a tuner about power figures on cars.

I just wish I could email him the info to rub it in his face.

Well NZ's top tuning company Speed Tech Motorsport (STM) have had a little project going since late last year Project Haggis. A Evo 9 going for the Stock Block world record held by AWD Motorsport in America.

I thought it was quite impressive power figures and thought I would share the info. Some will think pffft thats not much power, some will say wow thats alot and impossible...

Heres the proof, enjoy :)

Small doco before current tune: http://stmtune.wordp...project-haggis/

Facebook photo with tune info: http://www.facebook....&type=1

Yeh maybe. I dont know much about the strength of evo engines. Maybe they are real robust. But Ive also heard of 400kw RB26'es on an unopened engine, but they didnt last long. They always got tracked and dragged haha.

But who knows maybe the tune is there for longevity. But how protective can a tune be at 400+kw haha. Sounds angry though.

yea, the tuning company STM do not recommend going for this amount of power on a stock engine and the owner is aware of the consequence's. just a wait and see. he still need to learn to drag it and get used to the power lol see what happens.

if its just for the record and braggin rights sure. but with any hard use ( i assume drags and/or curcuit racing) it will not last long. no matter how robust the engine is.

but i'm sure it doesnt bother them, when it does go kaboom. it can always be rebuilt and made faster again :thumbsup:

Wont last long on that power level.

We did a Evo at CRD that made 340 odd kW @ wheels on stock internals and the owner wasn't shy. It's didnt detonate or anything but it bent a rod! The bent rod lead to the bearing catching. They caught it quick and pulled the engine down and all that was wrong was 2 bent rods and one bearing starting to let go. No damage to bores, rings or pistons.

Tune determines if a power level is safe but sometimes you can literally over power a factory component

Wont last long on that power level.

We did a Evo at CRD that made 340 odd kW @ wheels on stock internals and the owner wasn't shy. It's didnt detonate or anything but it bent a rod! The bent rod lead to the bearing catching. They caught it quick and pulled the engine down and all that was wrong was 2 bent rods and one bearing starting to let go. No damage to bores, rings or pistons.

Tune determines if a power level is safe but sometimes you can literally over power a factory component

This makes sense to me

the 290- 320 wkw is the common max power range in nz for evos before rebuilding and forging the engine. and 350 is prob the most common for a evo forged on pump. tho a guy has made the 400wkw on 98 pump lol he thrashes the crap outa it all day every day, not surprised its been in the workshop a couple times for repairs ha.

i duno why he did this but hes a bit nutty lol

<-- him trying to do Gymkhana lol it wasnt "closed off streets"
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...