Jump to content
SAU Community

Recommended Posts

Tell ya what though, it's only at $8,600 at the moment.

It's clearly had a lot of work. Even if it doesn't do 9s, if it goes for under $10k I reckon someone got themselves and absolute bargain. If I were in the market for a 33 I'd try and buy it.

Of course I would not pay a cent until I actually pick the car up/inspected the car.

Went for $11,700, as said even if it doesnt do 9's, still a good buy for the same sort of money as a stocker

Yeh I dunno about that, the whole thing is suss to me. I mean, we know what claims the owner made about the car that were obviously untrue. What else could he be leaving out? It may just be me, but I wouldn't put (a claimed) 40k into a car and then put it up for auction starting at $1 with no reserve...

Yeh I dunno about that, the whole thing is suss to me. I mean, we know what claims the owner made about the car that were obviously untrue. What else could he be leaving out? It may just be me, but I wouldn't put (a claimed) 40k into a car and then put it up for auction starting at $1 with no reserve...

Which is why you wouldn't part with a cent until you've seen the car and checked out it's all legit and worth it.

It's not hard to not get ripped off when buying over ebay.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...