Jump to content
SAU Community

Recommended Posts

Hi guys.

Ive just got my car back from the shop where they installed a gcg high flow and did a tune.

The car runs amazing, with only one minor problem.

When under heavy boost it sometimes has a misfire (hard to explain, but feesl like a short loss of power. bit like a stutter.

This only happesn sometimes and usually when im in boosting hard in 3rd or 4th (around the 400rpm).

I guess it feels like a minor electrical problem (not that im qualified to know!)

I've done some reading but basically so many things to check I dont know where to start.

Anyone have any ideas before i take it back to shop?

thanks

Link to comment
https://www.sau.com.au/forums/topic/391404-intermittent-misfire/
Share on other sites

How old are youe coil packs?

What type of plugs are you using @ what size gap?

If the shop tuned it, I would expwct them to put new plugs in.

I would be pointing to old coil lacks that are breaking down under boost

I have a feeling you are probably right with coil packs?? I've never changed them since ive had car (5 Years)

Car made really good power considering the little mods (i couldnt believe the dyno sheet).

I had the plugs done a few years ago and used irridiums.

Say it is the coil packs (cos i dont know what else it could be!) is there any harm leaving it like this? Specially considering i rarely need to drive it that hard.

Thanks!!!!!

thanks for the replies guys.

In terms of the tuning im not exactly sure. Basically my stock turbo let go so i got a GCG hi flow. The tuning was on the dyno to get it perform as best as it could without comprimising reliability.

It is my daily driver so I need to make sure it is reliable.

like i said I was surprised surprised to see the dyno sheet (225kw) and how amazing it runs.

most times the car is spot on and feels great. only occassionly when i drive it very hard (which i dont normally do, did it to see how the turbo felt) does it do it.

I have a feeling it is the plugs or coil packs.... not that id know.

If it is - considering that hte problem hardly ever happens could i be causing any problems be driving it like that?

thanks for your the replies!!

yeah if its making that sort of power you will be hitting the standard ECU protection - TTPMax

what are you using to control boost, is it a controller or just the actuator spring?

if you are using a boost controller turn it to 2psi and see how it goes

if you arent using a boost controller then you are stuck with the minimum boost possible from the acutator spring, its probably 1 bar, which is prob too much for stock ecu

let us know answer to first question (controller or not)

have you got a fuel pump? this thing could be leaning out on boost if you haven't, mine leaned out on the stock turbo and 0.85kgcm2 and yours is highflow with more boost

thanks for the replies again.

the boost controller is just the manual boost T, the cheap $30 ones.

not sure i get how the boost is working, well specifically why the minimum would be 1 bar? my standard turbo was set to 10psi. now with the hiflow the shop set it electronically to 11 (ok well on the dyno sheet that is where it is making the power). that said, my gauge can be pushed to 14.

Fuel pump is stock also.... my plan was to only upgrade things when and if the break. Hence the turbo.

Thanks again!

hey mate as old mate said a couple of replys ago i would start with new plugs bkr6es there $8.20 each at burson, I would say its missing due to the car making more power and ur shitty old plugs cant handle the load in 3rd and 4th and if you can i would replace the fuel pump asap cause the standard pump would only be good for a little over 200rwkw and im guessing its the original pump so it around 15yo and u dont want to lean ur motor out everytime u hit boost

ok. I've popped the top of and got to the coil packs / plugs.

Changing plugs will be my next step - though wondering if there is any way to determine whether one of the coil packs is stuffed?

I thought runnign the car in the dark might have shown sparks if there was a crack. i may have been wrong but I definetly didn't see anything.

any help appreciated!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...