Jump to content
SAU Community

Recommended Posts

hey guys i know this sounds like a retarded idea but i wanna put the sub setup the the R35 has into a 32 gtr, has anyone done this or know who the best person is to speak to, upholsterer, Alberts car sterio or a sterio mob?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/391493-r35-bose-subs-in-r32-gtr/
Share on other sites

yep its retarded, BLOSE car audio suck frothy sweaty balls . you can build a box that sounds better and takes twice the power and same space , why would you use that rubbish ? recycle it and be kind to the planet

any sane installer would say no way. its a step backwards compared to the cost to use it. pro car audio walks all over BLOSE stuff, even cheap speakers are better then BLOSE if used in a good custom box

did I mention BLOSE is junk , most are just paper cone drivers that die in the heat and wet weather (even the famous 301- 901 home speakers are paper cones in good tuned boxes) , low ohm load speakers with low power built in amps , used in a 7th order bandpass box, double reflex box to improve the sound

ok one more time, it sucks and isnt worth it. break it open and use the magnet for your fridge photos cause thats all its good for or to replace a dead one in another R35 ?

I wouldnt install it in my crapper

yeah i see what u guys are saying i only ment it as a concept as you say cause i couldnt figure any other way to explain what i wanted.

yeah i ment like have the subs in a custom box with maybe some rockford T1's in the rear seat.

You could do it

Police and thieves will love you

To remove the rear seat you have to re registet your car as a two seater and weldup sealup the holes etc or defect magnet

A small comsole with sub would be ok like r35 but lots of better options exist

troy, R32 had a drop down centre armrest. that makes the concept a bit easier. only thing being is that I am not sure if that was a sedan only thing or a trim level on the 32. mine does not have it. also the steel barrier behind the seat would need modding and strengthening.

You could do it

Police and thieves will love you

To remove the rear seat you have to re registet your car as a two seater and weldup sealup the holes etc or defect magnet

A small comsole with sub would be ok like r35 but lots of better options exist

what sort of options do i have?

I cant really put them in the boot with the Battery and the fuel system?

plenty of room in the side panels in the boot ? the side panels in the rear seat area, or buld a console to merge with the front, or ditch the not so light weight spare ?a little fiberglass and a shallow mount sub on one side, amp the other side done

chris some 32's have the arm rest , some dont, I've seen a few without it, not sure what option level it is ? but anyway I understood the concept portion inbetween the seats. just BLOSE speakers are average at best compared to other options

plenty of room in the side panels in the boot ? the side panels in the rear seat area, or buld a console to merge with the front, or ditch the not so light weight spare ?a little fiberglass and a shallow mount sub on one side, amp the other side done

chris some 32's have the arm rest , some dont, I've seen a few without it, not sure what option level it is ? but anyway I understood the concept portion inbetween the seats. just BLOSE speakers are average at best compared to other options

yeah i totally agree bose are terrible, hmm u have given me alot to think over

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...