Jump to content
SAU Community

Recommended Posts

Hi Fellas,

There is a R33 GTS-T which im very close to buying, i just want to get a report from REVs about previous write off status and if there is any encumbrance. I have put the vin number on the REVs website and the rego but it says that there is no match in there database? could they not support imports?

Any other recommendations for things to look for/ test to conduct ?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/391673-pre-purchase-question/
Share on other sites

Take someone with you who knows Skylines and get them to go over it.

It's amazing what you figure out about these things after owning one.

Whereabouts is it located?

Make sure you're using the compliance vin number.... whistling.gif

Im using the vin number 6U9000ECR33107095

That's the number on the vic roads website when i put the rego in ... pinch.gif

Here the the carsales link to the car http://www.carsales....282&distance=25

Edited by Radion

93 model made in september. AT f4 is auto confirmed by putting my vin in it said MT F5 guessing 5 speed manual.

Hope this helped mate.

Thanks jack,

RANDY put the vin number through for me another thread and it returned what seems to be correct results :/

http://www.skylinesaustralia.com/forums/topic/128496-vins-you-want-fasted/page__st__3020__p__6236563#entry6236563

Im going to steer away from this one, too much confusion is making me uneasy lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...