Jump to content
SAU Community

Honda Club day at Wakefield Anzac Day

Duncan

By Duncan,
in Events Archive

 Share

Recommended Posts

typerlc Apprentice

typerlc

Posted
Posted
yeah the civic was out there, pritty good for a stockie!

there was this crazy little white old civic with a turbo integra engine. Now that was interesting. It was hunting down a worked wrx with cheater tyres.

My civic went well ... but we ran out of brakes at one stage, and of course didn't bring any spares for the day. So we ran around Goulburn looking for pads. Supercheap didn't have any, but they had ones that were roughly the right size. So we bought those, and an angle grinder, and "made" them fit. :alien: At least we got back out on the track. :thumbsup:

The old EB2 Civic has IIRC, a T28 running 13psi boost. In a car weighing about 700kg, that means fast!!!!! At its last 1/4mile run at WSID, it got a 12.8.

I was lucky enough to have a drive on the day, and oh my god ... that much power was never meant to be put through the front wheels. Especially since he had just blown up the gearbox, and had replaced it with another but without LSD. It was scarrryyyy!!! And because of the short wheelbase, it is twitchy as all hell when braking hard. Pedal placement was a nightmare ... all offset to the left, and for me to reach the pedals comfortably, I had to sit disturbingly close to the wheel ... I guess not a problem for others, but I didn't start off feeling comfortable.

Unfortunately, the old civic trashed its diff, so was still at the track when we locked up ... waiting for the tow truck.

On another topic, was the green S14 yours Carlo, or a mate of yours? What happened to it?

Merli Grand Master

Merli

Posted
Posted
hey, at least you didn't blow your engine up first :thumbsup:

Now you know why I'm so worried about grenading my RB26 and won't track it until it's fully sorted for circuit work :)

Merli Grand Master

Merli

Posted
Posted
hey, I had a big sump with baffles. maybe it cant work from the box in the boot tho?

You obviously forgot to connect it up to the fuel tank... DUH!!!!!

n00bs :thumbsup:

fatz Grand Master

fatz

Posted
Posted

when a driver of a gtr gets excited they rev the engine to hard (8500-9000)

cause the engine is spinning so hard all the oild gets pumped to the top of the engine becasue the sump only holds 5 litre maybe 6 if you really top her up

constant over revving of the engine leeds to what we call the duncan syndrome (gtr engine go bye bye) due to a lack of oil in the sump which leads the pressure loss when the pic up starves

solutions are many

1 dont over rev the engine 100% of the time on the track

2 overfill your oil (not recomended)

3 oil cooler to increase capacity of oil in engine

4 instale sump baffels to stop the starvation

5 head restrictor

6 larger sump

we love you druncan

now that i have bagged him out something will probably happen o my engine (touch wood)

Merli Grand Master

Merli

Posted
Posted
sbs is when you have a gtr owner that is too scared to go to the race trace and sights sump bafels as an excuse

merli

lol

lol

lol

lolo

lol

blah blah blah :thumbsup:

Just you wait :) I need to reclaim the record back off Dundan at EC :D

What's it set at these days? :)

Merli Grand Master

Merli

Posted
Posted
you big girl merli

you comming saturday

I'm going to try and make it out in the morning...

I have a wedding starting at 3pm in Waitara (somewhere up north woop woop) so it's gonna be a loooooooooong day.

Merli Grand Master

Merli

Posted
Posted
but if there's no oil in the sump, how are baffles going to help.  I guess you mean there is still some, but without baffles it is distributed over the whole sump and hence the level is too low near the pickup?

It's a combination of not enough oil, and oil moving around the sump at high cornering loads. Nothing underneath the oil pickup left to squirt up into the head.

Baffles help keep some oil underneath the pickup, larger capacity sump helps overall oil reserves and cooling, oil cooler does the same thing, and most importantly, and oil gallery restrictor in the head restricts how much oil gets sent up into the head (too much in standard configuration) and leaves more oil in the sump.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...