Jump to content
SAU Community

Recommended Posts

ive had this car for about 5 months now, the car is stock (r33 gts25 auto) as can be. i have only managed to clock over 400km twice and hit 450km once.

Driving during peak our traffic the car seems to struggle on efficiency and only got about 45km out of the last 1/4 on the tank.

i am running it on premium but was told that i should try 98 as it is better for the engine.

can anyone help me, thanks

first thing to do is to not start looking at how far you are getting "on a tank" and start looking at what your actual economy is. put it into litre per 100kms because that will give you a better idea of how poor your economy it is and whether your fuel gauge is just a bit dodgy. things to test with the car will be the O2 sensor (can be done with a multimeter or a consult cable) and take note of how long the car takes to warm up when driving. the car should come up to temp (middle of the temp gauge) within about 5 mins of driving. if it takes longer than that, or doesn't come up to the middle of the gauge, then the thermostat may be dodgy and this will cause excess fuel usage.

and peak hour traffic is going to kill your economy. driving style will have the biggest effect on economy. light on the throttle. coast as much as possible. if there are a few lights in a row and the next one is red, don't floor it to the speed limit and then get hard on the brakes. just cruise along at 30 or 40kmh, then just lift off and cruise to a stop.

having said all that, i'm guessing (without knowing how much fuel you are actually putting in) that your economy is probably only around 13L/100kms to 14L/100kms, which for an auto skyline in peak hour traffic isn't too bad. it will never have the same economy as something like a 4 cylinder hatch, as they are a smaller, detuned engine in a lighter car.

a simple way to rule out any mechanical issues is to fill up with fuel (somewhere close to where the motorway starts so you can do a pure highway driving test), go for a cruise up the highway for 50 or 60kms, turn around and come home and fill up again. see what economy you got on the trip and if it's down around 10L/100kms then there is nothing wrong with the car and it's purely the traffic conditions and possibly your driving style that is causing the poor economy. when cruising on the highway the ecu uses the o2 sensor for fuel economy, so if it isn't working you will use more fuel. the ecu ignores it when accelerating above a certain load point (uses it for light acceleration, but not for heavy)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...