Jump to content
SAU Community

33 - 34 Auto Transmissions

shy_s6
 Share

Recommended Posts

shy_s6 Veteran

shy_s6

Posted
Posted

heya guys just wondering how hard it would be to change my mates tired r33 n/a box to a 34 gtt auto box

im looking at buying a 34gtt auto wreck to part out, (keeping the neo for my s14) and my mates 33 box is on its way out, so wondering how hard would it be for us to do the conversion considering i will have all the parts from the 34

will it bolt straight up? speedo cables? lengths the same as 33 box so just use the 33 tailshaft, ecu's etc etc

any info would be great guys!

whats a gtt auto box worth anyway?

Link to comment
https://www.sau.com.au/forums/topic/392913-33-34-auto-transmissions/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted (edited)

The R34 engine ECU has an add on board in it to do the job of the separate TCU in the R33.

If you really really really want an R34 tiptronic trans, then the easiest way to get it would be to do a complete Neo+tranny transplant. That way you don't have to try to work out how the hell you're going to make the R33 TCU control the R34 trans.

whats a gtt auto box worth anyway?

Effectively nothing. I got one attached to my Neo engine and I sent it to the tip.

Edited by GTSBoy
bubba Grand Master

bubba

Posted
Posted

The R34 engine ECU has an add on board in it to do the job of the separate TCU in the R33.

If you really really really want an R34 tiptronic trans, then the easiest way to get it would be to do a complete Neo+tranny transplant. That way you don't have to try to work out how the hell you're going to make the R33 TCU control the R34 trans.

Effectively nothing. I got one attached to my Neo engine and I sent it to the tip.

This ^^

You pretty much would have to run a 34GTT ECU, which isn't such a bad thing as they can be NIStuned but would mean changing CAS, coilpacks?, afm?, injectors?

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Better to get a 33 auto - people here just dump them when they do a manual conversion as there is no market for them - I am sure you will be able to pick one up cheaply and save yourself a lot of headaches.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...