Jump to content
SAU Community

The Great Rb20 Parts Sale!

BOOZTJUNKEY

By BOOZTJUNKEY,
in Classifieds

 Share

Recommended Posts

BOOZTJUNKEY Proficient

BOOZTJUNKEY

Posted
Posted

As above I stripped down 2 engines I had hear all parts available minus power steering pump etc and turbos

Parts are as follows

Rb20det short motor complete from rockers to sump water pump was pulled of but still have it .

Unknown ks needs a degrease 150

Rb20 block complete from pistons to sump bores look cyl 1 looks oily so probably got a cracked oil ring

X 2 standard cast turbo manifolds 50 each or I can weld on waste gate pipes( what ever size) for an extra 100 so 150 for the modded manifolds and 50 for stock

X 2 sets of rockers bit dirty could use a paint or clean 70 bucks a set as they sit

For 200 a set I will clean them and bead blast them silver and weld alloy speed flow fittings on to suit catch can applications

X 3 factory inlet manis top and bottom halfs one 80 dollars per complete plenum( top and bottom halfs)

X3 sets of factory injectors one set ea just pulled of my running engine only have 100k on them want 100 for them

The others two sets can be had for 80 for the both due to unknown condition

Rb20 set if 6 coils seem to be good condition no burn marks or burnt inner coils should be good except one plug was broken on removal but still usable 100 for the set

X2 ac compressors unknown cond 40 each

X2 ac cast alloy mounting brackets to block 30 each

Timing belt cover rb20 has hks sticker on also hasn't got rb20 stamped on it which I thought was cool 50 take it away

X2 j pipes ( crossover pipe ) both rb20 but two different styles one maybe cefiro both have factory bov points 50 each

Drift atmo bov adjustable style silver and black good cond worked when I took it of 70 bucks

Factory dump pipe good cond 60

Factory heat shiel 10

X2 flywheels need machining 50 each

Set of engine mount brackets rb20 70

Turbo oil return pipes x3 10 each

Adjustable cam gear for rb good cond 30

Hks rear coil overs for r32 gtr or 300 zx SUIT REBUILD 100

Gtr front coil overs they are factory gtr suit gts or gtr good cond 70

Gts factory front castor bars ok bushes 40 bucksfor the set

Factory fuel rails x3 30 bucks each

Coil pack brackets x2 sets 25 each

X2 factory 65mm throttle body's 40 each

There is more but all u can think of for now

Link to comment
https://www.sau.com.au/forums/topic/393212-the-great-rb20-parts-sale/
Share on other sites
  • 3 weeks later...
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

I have a balancer chris

And Ian I'll MSG u soon

has a 4 rib belt on it (my current RB25 one is 3 rib.)?

shoot me a price if it does.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...