Jump to content
SAU Community

Recommended Posts

Item for Sale: 1999 Nissan Skyline R34 Gtt

Description: R34 turbo, manual, coilovers, catback

Location: Bray Park QLD 4500

Region: QLD: Brisbane North

Odometre: 80,000 kilometres

Asking Price: $19,000 Firm

Reason for Sale: Too clean and well looked after to track it.

Extra Information:

I searched hi and low when i was in the market to buy and this was by far the cleanest and well looked after R34 I could find. Previous owner was the first owner in Australia and I could tell he took great care of the car, and once he was convinced that i would take the same level of care with it he agreed to sell.

This car is an absolute dream to drive, it is my daily and it drives fantastic in traffic, highway, around corners, has great power down low so that you aren't always gearing down in slow traffic.

Some specs:

  • Genuine 300km/h Nismo Dash
  • Aftermarket Panel Filter
  • 3" Fujitsubo Catback exhaust with 4" Cannon (has a great note to it, nice rumble, not too loud)
  • Tein Fully Adjustable Coilovers - Professionally lowered to exactly 100mm - Handles like a dream
  • Skyline 350 GT Wheels wrapped in Michelin PilotSport 3 tyres ($1200 for the tyres alone) Just about brand new (90%) amazing grip in the dry and wet
  • Autowatch 3point Alarm/Immobilizer with Turbo Timer
  • 3 Prosport gauges fitted into original gauge holder, fitted these myself and looks like its come like that from factory, not like some other poor attempts that i have seen. (oil temp/exhaust temp/boost - psi) oil sandwich plate was fitted to the car for the oil temp gauge, has another port if you wanted to put in an oil Pressure gauge, would be a 5min job.
  • Sony Xplode 7" Touch Screen Head Unit - with wires running into glove box to connect Ipod
  • Kicker DS600 6" 3 way speakers
  • Hydraulic boot solenoids installed, can only be opened from remote

Also had L.E.D brake light that isn't currently fitted to the car but will be included in the purchase.

Car has been serviced buy Elite Racing Development with receipts to prove

I have priced this car at what i believe is a fair value for what you will be getting, there are certainly cheaper R34's out there, but i invite you to go have a look at all of them and then come view my car, the car will speak for itself. As mentioned about, the price is quite firm, i am in no rush to sell the car, and the only reason i am selling it is because i want to get some drift/track time in and i would rather buy a car more purpose built then wreck such a clean example of a R34, so i am open to swaps, like a say, something more geared towards drift/track work, something with some decent power, i'll definitely take a look, only interested in another import, straight swaps or swaps with cash my way, unfortunately i don't have money to put towards a swap.

If you have any questions, send me a PM, i am on here daily, if you want photos of anything specific just let me know

post-87035-0-50449900-1330831176_thumb.jpgpost-87035-0-80658600-1330831216_thumb.jpgpost-87035-0-45032200-1330831256_thumb.jpgpost-87035-0-81329700-1330831286_thumb.jpgpost-87035-0-91298800-1330831318_thumb.jpgpost-87035-0-27023000-1330831358_thumb.jpgpost-87035-0-54743000-1330831386_thumb.jpgpost-87035-0-17904900-1330831411_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/393690-r34-gtt-qld/
Share on other sites

how many total kms? nismo cluster alone has 80,000

The car was imported from japan with this cluster, so it would be very hard to tell its true km's, but having a look at the condition of the interior you'd be able to see it couldnt be very far off, the previous owner also did a full 100K service just for peace of mind

Link to comment
https://www.sau.com.au/forums/topic/393690-r34-gtt-qld/#findComment-6265852
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
  • 6 months later...
  • 2 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...