Jump to content
SAU Community

Recommended Posts

hey guy. Been looking around at repco super cheap n autobarn to find the lil clips that go with my side skirts as most of them have broken off is there anywhere i can get them non of the places ive been to have them

Link to comment
https://www.sau.com.au/forums/topic/393969-s1-dayz-edition-body-kit-clips/
Share on other sites

Just go to you local Nissan dealer; provide your VIN; and get them to source the clips. That's the easy way.

If you want to do some detective work; there are stacks of body clips on Ebay; you just need to look for the ones that look like your clips.

It can take a while; but I found the clips I needed for my car, a bag of 30 for $10 delivered. Nissan were charging $2.70 PER CLIP.

  • 2 weeks later...

Call Ferntree Gully Nissan

Or

Blackburn Nissan

Both of them are very good for parts.

Rang up both nissan they cant get the clips i need :( btw the clips im talking bout are clips that go on the top of the skirt and clip into the body of the car.

both nissan spare parts told me to get this fixing kit (G685X0V00) or to try nissan in japan.

also was unable to find clips on ebay lol might email nissan jap n see what they can do

can u upload a pic of the clips that you have??

Rang up both nissan they cant get the clips i need :( btw the clips im talking bout are clips that go on the top of the skirt and clip into the body of the car.

both nissan spare parts told me to get this fixing kit (G685X0V00) or to try nissan in japan.

also was unable to find clips on ebay lol might email nissan jap n see what they can do

can u upload a pic of the clips that you have??

here is the clip

Clips.jpg

by the looks of things the big clip is the main clip for the side skirt i need 14 of these clips

excuse the small clip as a clip broke in 2

IMG_0517.jpg

gives u an idea where the big clip goes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...