Jump to content
SAU Community

Recommended Posts

Bah, I've learned to take it with a pinch of salt. The car isn't my daily anymore so I am fairly flexible on time. It does get frustrating at times, especially when I end up wasting a lot of money, but a tiny masochistic part of me thinks I'll miss the puzzle once it's solved :laugh:

Good stuff mate :thumbsup: I spent all of last Saturday chasing down some ethanol compatible submersible fuel hose in Perth, only place that had any in stock was Repco in Morley. They had two of the Gates Submersible 30cm hoses, I bought one of them, so they might still have the other one? Hopefully you can find some anyway, it was a bit harder to find than I thought it would be.

My car is all back together now, took it for a quick drive yesterday and all seems fine. Only possible issue I noticed was it has a slight 'hesitation' on gentle acceleration at roughly 3500rpm. I was taking it very easy, so I'm not totally sure what that hesitation is, possibly a misfire from having played with the timing or removing the CAS, maybe even just an air leak. I will pressure test the intake today to check for leaks to be sure, and my tuner wants me to drop my cat to make sure it's ok as well as check the turbo bearings. I'm sure both are fine but I will do that today as well. The only other thing is my tuner found that cylinder 1 is running extremely rich:

1240647_10151560954312541_972545271_n.jp

This is interesting as I hard the spark plugs out about a month or so ago when I did the comp test, and they were all squeaky clean. So I suspect this may have been from the fuel pressure being bumped up to 60psi, though I'm not sure why only cyl 1 got fouled. Will need to look into that...

Should also mention that I checked my valve clearances while I was doing the cam timing, and they are all very close to spec. Tomei say 0.45mm, most were around there with one or two being a little loose and a couple a little tight, loosest was 0.50 and tightest was 0.40. Nothing drastically out there, so that rules that theory out. Back to guessing games now.

Otherwise it's unfortunate that it's Saturday now, otherwise the car would be going back to the tuner today. Plan is to take it back on Monday. Possibly just have to run it up on the dyno again and see how it goes, but tuner would really like to find what is wrong before we do the tune. In the case of the flex fuel tune, we have come up with a compromise for that. My plan was always to run the car on E85 and just be able to have unleaded as a backup without needing to purge the tank. So the car will have a lot of time set up between 60-100% E85 to allow for any variance in the ethanol content of the pump fuel, and will also be set up for 0% ethanol. The lower ethanol percentages will be roughly set up, but I won't be able to drive the car in anger at those levels. Perhaps not the perfect set up, but it saves a lot of dyno time that would otherwise make the whole project unaffordable.

There's something definately wrong with the first cylinder

Looks like its not firing at all

That would explain your cruising hesitation

No, those plugs pictured never went back in. New plugs went back in, and the new ones are all clean. Also, with the old plugs the car never misfired. So I'm in two minds about whether it was maybe a faulty plug. I don't know, need to do more investigating.

Well, doesn't look like the plugs are any indication. The old plug fouled in roughly 40km's of driving. The new plugs have now done about 120km's and I just checked them and they are all perfect. So my guess is either it was a faulty plug or it was the fuel pressure being at 60psi for a couple of cold starts that caused it to foul. I'll keep an eye on it, but I don't think it is going to happen again.

Now to check the turbo bearings and cat.

Edited by Hanaldo

Yes I've seen it, but that's not a true flex setup. It has been manually set up at each ethanol percentage increment, which is hugely expensive in dyno time. It was an be done, but it's not affordable. Would be cheaper and easier to but the Haltech and set that up.

I don't know if I missing something here, but I'm actually not sure how you can call the Link not proper flex fuel - especially with the amount of full flex fuel cars running ViPEC/Link ECUs there are running around. If you mean having a predefined table that makes life a bit easier for the tuner, and has the potential to promote laziness then sure... that's all good, but I'd not say that it means that the Link isn't proper flexfuel.

You realise those scalars are just a thing to make the maths a bit easier, and more of a tuner aid that outright functionality - and arguably are a starting point as opposed to a thing there to mean that you don't need to tune properly? IE, I'd never load a base tune into a car and let someone thrash it without confirming. Those scalars can be merged manually really easily and used in a Link as well, you just don't have the separate scalar table with magic numbers in it so it might cost you an extra 4-5 minutes (generous estimate of how long it would take me to calculate out about 10 numbers and plug them into a table) if all the tuning you were going to do was a pump gas tune, an E85 tune, then rely on magic numbers to fill in everything in between.

  • Like 1

You're correct Lith, it is true flex fuel. Perhaps I misused the word 'true' when I said it isn't, but my point was that the Link ECU isn't (and I loath to use the Haltech advertising term for it, but for lack of a better one...) 'flex-ready'. In that the G4, being as flexible and powerful as it is, can be set up to achieve the task, but it doesn't have those starting points that save a lot of time.

I guess what it comes down to is that I can't afford the time my tuner believes it would take to completely work everything out.

  • Like 1
  • 2 weeks later...

Well, car should be done today, possibly early tomorrow. Gave promising signs early on but then went back to being a piece of shit. Do still don't know what's up, but at least it will be better for the environment now! :/

Picking the car up tomorrow. Tuner said he wants to drive the car back to his house to make sure it goes ok on the road and cold starts ok. Goes so far above and beyond any other tuner I've ever been to, so anyone in Perth reading this: Danny at Garage 101 is a legend.

Anyway, car didn't quite crack 400rwhp on E85. Will find out the exact number tomorrow. But it didn't go at all well. Needs more dyno time after this tank of E85, and it has issues.

Not sure, will find out today. Not that much I don't think because he mentioned it was over boosting to 22-23psi and it wasn't good. It makes better power with more timing and less boost.

Ok, so I picked the car up this morning with the setup about 90% finished. Unfortunately there was a bit too much 98 in the tank, so when my tuner filled it up with E85 he could only get it up to 53%. My tuner wanted me to drive the car and use the fuel rather than purge it, and make sure everything is running well as it is. So it's tuned to that at the moment, and I'll go back in a few weeks to finish the scaling and fix up any issues that I notice. The car drives MUCH better. It's unbelievably nicer to drive around, even just cruised. Haven't had much of a chance to put my foot into it yet with the weather here, but hopefully will do soon. Once again, legendary effort from my tuner, he sat down with me for an hour or so this morning and had a chat about how he's set it up and how it went and what he thinks might be potential issues.

I forgot to get a dyno graph, but the car made 390rwhp @ 19psi on the E53. On the pump fuel tune, it struggled to make 320rwhp. It doesn't like boost at all, it makes much better power with more timing and less boost. It did also have some issues with misfiring on full load every third run or so, Danny thinks these may be issues with the dwell settings or something else within the ecu, so he is finding out from Link. He mentioned that the power was still climbing when it hit the rev limiter, so he thinks it will finally crack the 400hp mark when we get it back in to finish the tune.

Unfortunately, as much as I hate to admit defeat, it does look like this turbo just isn't up to the task. I have tested extensively, but we just can't get it to perform. We do know the stock exhaust manifold and possibly the 3" intake pipe would be holding it back a little bit, but not enough to explain the low power. It is an odd one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...