Jump to content
SAU Community

Recommended Posts

Hi Everyone,

Let me start by, I do not wish to offend anyone without a GT-R. I usually do 3-4 cruises a year and have been doing Cruises for the last 11-12 years.

This is the first time I would like to do a GT-R Only cruise. Why? One of my favorite cars of all time are GT-Rs so it has been on my bucketlist.

So it is strictly GT-R Only (Sorry non GTR owners)

If you wish to come or know someone wanting to come who has a GT-R (32, 33, 34 or 35) then you have two options:

1) Email me ([email protected]) and I will keep you updated via email.

2) Add me on Facebook (https://www.facebook.com/b333fy) and I will invite you to the Facebook event.

RAIN = CANCEL! Safety is always #1 Priority. if it is cancelled/postponed etc it will clearly stated on Facebook or an email will be sent out.

No Wreckless driving will be tolerated!

We have about 12 GTRs going so far and about 7 maybes .. would be nice to get 20 confirmed (if possible).

Any questions, please don't hesitate to ask.

Regards

Brandon

Edited by beefy
Link to comment
https://www.sau.com.au/forums/topic/395768-1st-april-gt-r-only-cruise/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

It is more dangerous to drive in the rain even if you are just doing the speed limit. The whole experience of a cruise like this is also capturing the day maybe via photos/videos.

Photos do not look the best in a rainy, gloomy day. Also people get lazy and you get a worse turnout on a rainy day then if the day is a nice one.

I have always cancelled cruises if it rains. It is a rule of mine!

I do not promote wreckless driving but at the end of the day I cannot enforce them to stop. I can report them or ask them to leave.

and ... most times I hear from someone else by this time it is too late as all I can do is make a note and not permit them to come next time.

Trust me rain = cancel is in everyones best interest.

Btw, what is your concern? what brought that question on? Have you heard anything bad about me/GTCC?

Sorry guys. Been very busy with work.

I am going to say its a go ahead .. well at least to the meet spot. We can decide collectively to continue if weather is bad.

If you wish to get the details please email me. To avoid too many gate-crashes I am not going to post the meet details publicly. Just email me [email protected] and I will email you the meet details.

The meet will be @ 8:30 am leave at 9am .. It should finish approx 1pm but this is a new route for the GTCC so not 100% sure.

Maps will be provided @ the meet spot. CB Radios for those that wish to use them. Please make sure you check your tyre pressure etc, please come with a full tank of petrol.

Camera's is a great idea to capture some nice pics.

whats the point of having coilovers when its still jacked up?

i can be a smartass too. but im just saying its always twisties and im not risking a wombat through my front bar

hmm. Well I suppose there is a chance though as I said been doing cruises for 12 years and not seen one yet.

I did run over a snake once.

I suggest email me, come to the meet and make up your mind.

[email protected]

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...