Jump to content
SAU Community

Recommended Posts

doh, i just bought 8000k for mine- very blue

Is that illegal or something?

Not overly fussed about visibility as its a city car in perth. It doesnt rain much n u could also drive with your headlights off half the time n not notice with the street lighting...

Thanks guys

I've done a bit of research into the topic. 4300k is the closest to daylight colour and after that they start going blue. Most OEM's use 4300k globes but the most popular aftermarket colour is 6000k.

The most contributing factor is the type of headlamp they go into. Cut glass lenses (the old school type) tend to throw the light around. This is because hid light output is very directional and refracts easily. The best lamps are the projector and free form designs. They control the light much better and give a defined cutoff. Important so your not blinding oncoming cars.

Cheers

4300K is light yellowish, 5000k close to white (will look slightly off if you have white LED parkers), 6000k is white, will match white LED parkers the best and probably the highest you'd want to go for looks vs. visability. Anything higher tends to blue/purple and will be worser off for visibility.

I have 6000k in my HR31 and now R32 and are absolutely awesome :). Just make sure they are not aimed too high and blind other road users. Also if you are going to use them in non-projector type headlights you should probably get a Hi/Lo type kit as you will blind people no matter where you aim them ;)

Edit: Added a pic of my conversion half done.

post-27061-0-01867800-1333590863_thumb.jpg

Edited by ColdFusion

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...