Jump to content
SAU Community

Recommended Posts

Ok so here is the deal guys.

SAU will have a Merchandise shop coming in the very near future in line with the 10th Anniversary, SAU Nats/B'day party & a forum revamp…

For the online shop/merch – rather than have the designs created by someone who doesn’t really get what YOU guys want to see on a t-shirt/hoodie..

SAU is giving you the chance to design it yourself and in the process get a bit of cash for your troubles.

End date for designs will be Friday 04/05/2012

We are looking for the following items only at this stage:

3 x fashion t-shirt designs - Can be front only, or front/rear designs

1 x long sleeve shirt designs (for motorsport boys) - SAU logo or variation on left breast, incorporate the URL and whatever else

1 x hoodie design - Free range here, go as mild or wild as you like

1 x cap design - A good cap design is simple, but effective. Cap will need to have URL on it.

Cash that will be given out for designs chosen listed below. You will also get a free merchandise item that your design goes onto :thumbsup:

t-shirt: $100ea ($300 total)

Long sleeve: $100

Hoodie: $100

Cap: $80

For the Motorsport tops, please leave the sleeves spare. The plan is to put SAU Trader logo's down the arms for those that would like to come on-board. They will be supplied to whomever at a later stage once we decide on the designs.

So please get to your designs and post them in this thread. Christian will have the ultimate say, however there will be a 'shortlist' of a few designs, which will then feature in a Poll to gauge interest.

Any questions, thoughts, ideas - post them here. Please don't PM me, I get too many as it is smile.gif

End date for designs will be Friday 27/4/2012

Link to comment
https://www.sau.com.au/forums/topic/396342-help-design-sau-merch-earn-cash/
Share on other sites

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

I really like the SAU logo, we dont get it on ACT stuff but i think its nice with the red blue and white, and its got that GTR badge look.

New designs are a great idea, you will see all the awsome artists come out hiding.

For the t-shirts probably looking at 1-2 colour designs at the most.

Maybe a good photo of a car or engine bay perhaps for one.

Want to limit the colours as we don't want to make them too expensive to produce and then they become too highly priced. That said if the design is awesome then it could potentially still work.

If i get a chance i'll give this a shot if you guys would like. Im usually over at calais turbo (just signed up to sell some R33 parts) but i'd like to get involved somehow here, as i plan to get into skylines someday, im a graphic/industrial designer so this would suit me perfectly!

Idea for the back use a GIF image of all the SKYLINE models and SAU badge on front?

I was thinking this same thing, (have been looking for a good pic of a Skyline timeline etc).

Perhaps SAU on the front with Many diff models and have the web address on the back.

We are slowing getting somewhere now :D

I know a few other people are working on bits/pieces, hopefully they get posted sometime this week.

And don't worry about posting them public, that's the whole point.

Everyone gives input to improve ones design etc. If someone directly copies you it'll be rather obvious and they wont be given squat.

hey guys...

i've made up around 7 designs all of which can be put on either polo, long sleeved, or the hoodie.

What format would you like the pic to be in? also all the designs are just on a little t-shirt template that can be changed if needed.

also i will try to make something up for the cap aswell as a hoodie only design.

Thanks,

T

I was thinking this same thing, (have been looking for a good pic of a Skyline timeline etc).

Perhaps SAU on the front with Many diff models and have the web address on the back.

Timeline idea is cool,

I want a pic of a 32, others want there own cars too, timeline will please all.

A small Sau on the front right/left on the chest with the web address on the back across the shoulder blades in a long sleeve shirt, probably grey in colour with black writing and colored for the Sau.

Less is more for me, I don't need to wear a picture of my car to remember what it is :)

that cap looks really good id wear that, i also agree with whoever said about keeping it simple with something like luke gtr did. if you start putting pictures of cars on them they become less wearable for me. simple is the way to go... also black shirt with red and white writing will ALWAYS look mint :)

So here's my first post!

The idea behind my concept is the R32, R33 and R34 are the Skylines which were bred solely for racing. I feel slightly impartial to the current GTR because it doesn't have a H-pattern manual gearbox and is filled to the brim with tech (not that it's a bad thing).

In the same way, I believe the R31 is slightly too old and never came with a twin-turbo set up.

7070389171_5a79470765_z.jpg

7070389225_495da6f1d3_b.jpg

This was just a draft I did within a couple hours, I haven't touched Illustrator is ages and this was pretty fun.

Criticise away!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...