Jump to content
SAU Community

Recommended Posts

Ok so here is the deal guys.

SAU will have a Merchandise shop coming in the very near future in line with the 10th Anniversary, SAU Nats/B'day party & a forum revamp…

For the online shop/merch – rather than have the designs created by someone who doesn’t really get what YOU guys want to see on a t-shirt/hoodie..

SAU is giving you the chance to design it yourself and in the process get a bit of cash for your troubles.

End date for designs will be Friday 04/05/2012

We are looking for the following items only at this stage:

3 x fashion t-shirt designs - Can be front only, or front/rear designs

1 x long sleeve shirt designs (for motorsport boys) - SAU logo or variation on left breast, incorporate the URL and whatever else

1 x hoodie design - Free range here, go as mild or wild as you like

1 x cap design - A good cap design is simple, but effective. Cap will need to have URL on it.

Cash that will be given out for designs chosen listed below. You will also get a free merchandise item that your design goes onto :thumbsup:

t-shirt: $100ea ($300 total)

Long sleeve: $100

Hoodie: $100

Cap: $80

For the Motorsport tops, please leave the sleeves spare. The plan is to put SAU Trader logo's down the arms for those that would like to come on-board. They will be supplied to whomever at a later stage once we decide on the designs.

So please get to your designs and post them in this thread. Christian will have the ultimate say, however there will be a 'shortlist' of a few designs, which will then feature in a Poll to gauge interest.

Any questions, thoughts, ideas - post them here. Please don't PM me, I get too many as it is smile.gif

End date for designs will be Friday 27/4/2012

Link to comment
https://www.sau.com.au/forums/topic/396342-help-design-sau-merch-earn-cash/
Share on other sites

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

I really like the SAU logo, we dont get it on ACT stuff but i think its nice with the red blue and white, and its got that GTR badge look.

New designs are a great idea, you will see all the awsome artists come out hiding.

For the t-shirts probably looking at 1-2 colour designs at the most.

Maybe a good photo of a car or engine bay perhaps for one.

Want to limit the colours as we don't want to make them too expensive to produce and then they become too highly priced. That said if the design is awesome then it could potentially still work.

If i get a chance i'll give this a shot if you guys would like. Im usually over at calais turbo (just signed up to sell some R33 parts) but i'd like to get involved somehow here, as i plan to get into skylines someday, im a graphic/industrial designer so this would suit me perfectly!

Idea for the back use a GIF image of all the SKYLINE models and SAU badge on front?

I was thinking this same thing, (have been looking for a good pic of a Skyline timeline etc).

Perhaps SAU on the front with Many diff models and have the web address on the back.

We are slowing getting somewhere now :D

I know a few other people are working on bits/pieces, hopefully they get posted sometime this week.

And don't worry about posting them public, that's the whole point.

Everyone gives input to improve ones design etc. If someone directly copies you it'll be rather obvious and they wont be given squat.

hey guys...

i've made up around 7 designs all of which can be put on either polo, long sleeved, or the hoodie.

What format would you like the pic to be in? also all the designs are just on a little t-shirt template that can be changed if needed.

also i will try to make something up for the cap aswell as a hoodie only design.

Thanks,

T

I was thinking this same thing, (have been looking for a good pic of a Skyline timeline etc).

Perhaps SAU on the front with Many diff models and have the web address on the back.

Timeline idea is cool,

I want a pic of a 32, others want there own cars too, timeline will please all.

A small Sau on the front right/left on the chest with the web address on the back across the shoulder blades in a long sleeve shirt, probably grey in colour with black writing and colored for the Sau.

Less is more for me, I don't need to wear a picture of my car to remember what it is :)

that cap looks really good id wear that, i also agree with whoever said about keeping it simple with something like luke gtr did. if you start putting pictures of cars on them they become less wearable for me. simple is the way to go... also black shirt with red and white writing will ALWAYS look mint :)

So here's my first post!

The idea behind my concept is the R32, R33 and R34 are the Skylines which were bred solely for racing. I feel slightly impartial to the current GTR because it doesn't have a H-pattern manual gearbox and is filled to the brim with tech (not that it's a bad thing).

In the same way, I believe the R31 is slightly too old and never came with a twin-turbo set up.

7070389171_5a79470765_z.jpg

7070389225_495da6f1d3_b.jpg

This was just a draft I did within a couple hours, I haven't touched Illustrator is ages and this was pretty fun.

Criticise away!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...