Jump to content
SAU Community

Recommended Posts

take the fuel inlet hose off the engine. turn the car on and see if fuel comes out. also how sure are you there is fuel in the car. i work for racv and you would be supprised by the amount of times we have gone out to a car that the customer thought the fuel pump had died and.the swear they only.just put fuel in it only to get it back to the shop, pull out the pump and find an empty tank. next thing would be to check you afm. im sure someone on here could provide you with the voltages at the plug or if you know some with the same car see if you can borrow it

Link to comment
https://www.sau.com.au/forums/topic/396433-not-running/#findComment-6304078
Share on other sites

sorry for the lack of info

soooooo got some tools and done some basic tests..

fuel ok

fuel pressure ok

injector pulse ok

spark ok

even got the injectors flowed and tested just to make sure the wernt blocked

checked to see if the cat had failed and was blocking

problem is still occuring which leads me to belive its an electical problem

any ideas??

if it was the maf it would still run with a lilimt of 2500rpm becoz its in safty mode??

Edited by Benny123r33
Link to comment
https://www.sau.com.au/forums/topic/396433-not-running/#findComment-6310461
Share on other sites

an

take the fuel inlet hose off the engine. turn the car on and see if fuel comes out. also how sure are you there is fuel in the car. i work for racv and you would be supprised by the amount of times we have gone out to a car that the customer thought the fuel pump had died and.the swear they only.just put fuel in it only to get it back to the shop, pull out the pump and find an empty tank. next thing would be to check you afm. im sure someone on here could provide you with the voltages at the plug or if you know some with the same car see if you can borrow it

soooooo got some tools and done some basic tests..

fuel ok

fuel pressure ok

injector pulse ok

spark ok

even got the injectors flowed and tested just to make sure the wernt blocked

checked to see if the cat had failed and was blocking

problem is still occuring which leads me to belive its an electical problem

any ideas??

if it was the maf it would still run with a lilimt of 2500rpm becoz its in safty mode??

Link to comment
https://www.sau.com.au/forums/topic/396433-not-running/#findComment-6310471
Share on other sites

an

soooooo got some tools and done some basic tests..

fuel ok

fuel pressure ok

injector pulse ok

spark ok

even got the injectors flowed and tested just to make sure the wernt blocked

checked to see if the cat had failed and was blocking

problem is still occuring which leads me to belive its an electical problem

any ideas??

if it was the maf it would still run with a lilimt of 2500rpm becoz its in safty mode??

Unplug the afm and start the car. Doubt it's the problem though.

Link to comment
https://www.sau.com.au/forums/topic/396433-not-running/#findComment-6310592
Share on other sites

  • 3 weeks later...

Get a stand alone ecu.

None of this piggy back bs

bingo.

So, the usual advice. Do some research on who are the tuners in your area (you dont want to drive 2hrs + just to drop a car off for tuning of if any troubleshooting is required afterwards) and then work out who is the best and what is their prefferred platform. Of course cost is an issue but you usually get what you pay for and a bad tune = the need for a new motor = prob not worth skimping $200 for the cheaper tuner... In a similar vein, avoid Mine's tuned ECU's. not going into why here.

General consensus is that PowerFC or Z32+nistune is the way to go. Take into account whether having an aftermarket computer puts you in easy defect territory too (if so- nistune)

Link to comment
https://www.sau.com.au/forums/topic/396433-not-running/#findComment-6339786
Share on other sites

  • 5 weeks later...

Hi All,

I'm a noob so I'm not sure if I'm on the right thread or not, but here goes..

Last night I did the mod where you ground out the boost solenoid on an R33GTSt.

Well I read the entire thread on that before attempting it, & then did it as specified.

When I went to test it on my way to work this morning it would not rev over 2500rpm, just kept coughing until i dropped the revs below 2500.

I freaked out (i only just got the car), & put it back to standard, but it still wont rev over 2500rpm..

Have I broken something? Can I fix this?

So far I have reset the ECU as specified (disconnect batt & pump brakes)

I hot wired the solenoid to see if it works (it does)

& I tried running the car with the solenoid grounded & ungrounded.

Still only 2500 rpm..

Please HELP!!!

Link to comment
https://www.sau.com.au/forums/topic/396433-not-running/#findComment-6380612
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...