Jump to content
SAU Community

Recommended Posts

wrecking Nissan skyline r34 gtt 2000 red

lots of parts available just ask cheers

motor rb25 det neo complete $2500 ( 125,000kms)

gearbox $2000

pedal kit $200

tail shaft $200

flywheel $100

diff lsd $300

cv joints $150 pair

nismo shocks and springs $900

standard full exhaust system $300

brake master cylinder $120

front calipers $350

front disks $100

front hubs $150

rear hubs complete $300

upper control arms each $30

lower control arms each $70

cross member $100

rear upper control arms each $25

rear lower control arms each $70

power steering rack $150

Hicas $50

heater core 100

nismo wheels $1600

taillights $130 each

power window reg $150

ignition barrel plus door locks $170

blinkers switch on dash $40

ac display $120

rear bar $200

rear bar reinforcement $120

boot $600 with wing

boot shocks $70

doors $400 each

rear cut $1000

beaver panel $750

fuel flap $30

fuel cap $20

battery holder $20

washer bottle $50

radiator overflow $50

glass from $100

fuel tank $50

fuel pump $50

door trims $400 front and rear set immaculate

boot trims $100

interior light $20

seat belts (all 5 ) $150

dash $200

air bags $300

seats (front & back) $400 immaculate

antenna $50

call me on 0426504272 car is in Liverpool area

can post anything you want as well

Edited by anthony84
  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Hey Mate, I'm interested in the front brake calipers. Do they come with the bolts? Whats the lowest you'll do posted to 3021 VIC?

Cheers, Jason

PS: Your inbox is full

hey mate,

does nismo springs and shocks does that mean springs and 'coilovers'?

what is the age of them??

also nismo wheels, what model?? and tyre thread on them??

could you pm me some info on them??

Do you have the abs module ( alloy block in engine bay with 3 plugs)? how much

And abs wheel sensors 4 of them ?

the ecu on the right side of the boot on the back of the seat ( silver box ?

cheers

fyi.,,,

Some people might not realize series 2 car parts dont interchange with series 1 !!! Windows switches and electronics are way different they went to surface mount components and they wont work at All on cars pre8/2000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...