Jump to content
SAU Community

Recommended Posts

Hi team,

I have a few things I'm selling as they're no longer needed, because I have finished my projects and stopped whoring bits n pieces.

Some Pics later today and some later this week.

- Haltech E11v2 Near new (less than 800kms) with R32 GTR plugin loom - $800

- R32 GTR/R34 Genuine Recaro Seats and rails - $1000 (Drivers and Passengers )

- R32 GTR Full cabin carpet, as new - $200

- R32 GTR Steering wheel Very very good condition - $250

- R32 GTR Dspeed clear front indicators - $200

- R32 GTR CF Door weather shileds - $200

- R32 GTR CF Drivers side switches cover - $100 ono. NFI what this cost me.

- R32 GTR 3" MetalCat Cat - $200 (fit anything)

- R32 GTR Silk Road Intake & Headlight - $450

- R32 GTR Bonnet (Mint) gloss black - $900

- R32 GTR Bootlid (without wing and mint, same colour as Avatar) - $400

Misc - not priced and haven't made up mind up yet to sell. Pursuade me with a good offer.

- R32 GTR Fuel flaps with hinge, fuel cap, new front seatbelts, full set of locks n key, professional 2wd/4wd switch, centre console including 2wd/4wd switch & torque dial and lots more stuff.

- R34 GTT Airbox & Snorkel - $250

- R34 GTT Built Transmission (2months use). Stall/Torque @3000rpm - $500

- Autobahn88 Oil cooler and relocation kit (19 row) - $250

-> Package and post @ your expense<-

The condition of this stuff is either brand new or damn close to it. The gear is already at a good price - OK.

I'll add more stuff from time to time so keep an eye on this thread.

;)

Link to comment
https://www.sau.com.au/forums/topic/396589-r32-gtr-r34-gtt-firesale/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

PM Sent about oil cooler.

Thanks Sweefu, and close to home too.

Pm responded to mate, Wheels 2012 was aite hey.

No sandwich plate/thermostat but you would either be in a frozen climate or pushing beyond the limit to need it. :thumbsup:

Sin

Interested in these:

R32 GTR Dspeed clear front indicators - $200

- R32 GTR CF Door weather shileds - $200

- R32 GTR CF Drivers side switches cover - $100 ono. NFI what this cost me.

- new front seatbelts, centre console including 2wd/4wd switch & torque dial and lots more stuff.

Maybe swap and cash for a spare like the one you have?

Cheers

interested in R32 GTR Steering wheel Very very good condition - $250

can you pm contact number please

and which state are you located in?

Cheers

Garth

Scoobs :thumbsup: - you know where I live - lol.

That gear is still available as of right now. Lots of interest tho, so I'll put it aside mate.

Unit 27 now so turn right not left when you get in the complex.

Drop by for a chat and we can check the goodies out and maybe have a coldy.

Need to know who did your dash in that elanctra stuff.

Dang those seats match my interior, hmmmm

and your local - I call that destiny (if your quick)

regarding that silk road headlight/mesh intake, is the light in there high beam or driving light?

It just says "main driving light at night"

Price for the Silk Road Intake & Headlight - $400. Which is more reflective of cost and shipping to Aus..

Still for Sale

- Haltech E11v2 Near new (less than 800kms) with R32 GTR plugin loom - $800

- R32 GTR/R34 Genuine Recaro Seats and rails - $1000 (Drivers and Passengers )

- R32 GTR Full cabin carpet, as new - $200

- R32 GTR 3" MetalCat Cat - $200 (fit anything)

- R32 GTR Silk Road Intake & Headlight - $450

- R32 GTR Bonnet (Mint) gloss black - $900

- R32 GTR Bootlid (without wing and mint, same colour as Avatar) - $400

- R34 GTT Airbox & Snorkel - $250

- R34 GTT Built Transmission (2months use). Stall/Torque @3000rpm - $500

Misc - not priced. Pursuade me with a good offer.

- R32 GTR Fuel flaps with hinge, fuel cap, , full set of locks n key (will check), professional 2wd/4wd switch, centre console including 2wd/4wd switch & torque dial and lots more stuff.

Sold - Pending confirmation and Payment. (may be back up FS depending)

- R32 GTR Steering wheel Very very good condition - $250 (Maybe sold? To all who asked, I will post pics up this eve)

- R32 GTR Dspeed clear front indicators - $200

- R32 GTR CF Door weather shileds - $200

- R32 GTR CF Drivers side switches cover - $100 ono.

- R32 GTR New front seatbelts

- Autobahn88 Oil cooler and relocation kit (19 row) - $250

snooze and you may loose out

:thanks:

interested in R32 GTR Steering wheel Very very good condition - $250

can you pm contact number please

and which state are you located in?

Cheers

Garth

Many pictures sent to you :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...