Jump to content
SAU Community

Recommended Posts

Some F^&*wit tried to badge my car 2day :Bang: !!!! the wanker couldn't even do it properly. I have a custom GTS badge at the back of my car (just like the GTR only with an S) so the fool decided that an exchange of property was in order... he couldn't remove it but he bent it now... it's bent!!! Any ideas of how to bend it back without damaging it any further?

Link to comment
https://www.sau.com.au/forums/topic/39671-some-one-cant-badge-cars-properly/
Share on other sites

Hmmmm! how did you have it secured on?? can you get it off?? if so put it face down on a hard block with some towel or something under it to protect it.....then some gentle panel beating with a light Flat faced hammer, only hit the back of the badge. Good luck

Well the first time someone tried to take it off my car at MY OWN HOUSE and then 1 week later after i fixed it... some **** took it off totally (ALBION STATION), and yes i do realise in retrospect how dumb this really was and that i was asking for it but u live and you learn. Second time it was stuck on with Aroldite... It probably didn't bend this time so they took it off totally... also left me with a few scratches and a nice dint (when i find out who did this... their car will be badgless for the rest of their life) oh and i hope their crotch gets infested with the fleas of a thousand afgan camels and that their arms become too short to scratch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...