Jump to content
SAU Community

Recommended Posts

Heya,

Just purchased an r35 and picking her up tomorrow. Currently has potenzas which will need to be replaced in the not too distant future.

Anyone have any good recommendation for street tyres and suppliers (apart from the dealer). What other alternatives are there? I know there's the Dunlops.

Cheers

ECL

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/
Share on other sites

Cheers

Anyone have any experience with any of these?

1) Potenza RE070R (what is the difference between R2 and the normal one? which is better for just street use?)

2) Dunlop SP Sport 7010 A/S DSST (how do these compare to the potenzas?)

I'm at work so googling for reviews is a little hard (harder than posting on SAU) hahaha

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6301276
Share on other sites

if you dont need runflats, buy a set of michelin super sports - you'll lose a fair bit of weight ditching the runflats too

Cheers

Found a bit of a guide here too also

http://www.2009gtr.com/2011/09/nissan-gt-r-wheel-and-tire-fitment.html

Though i'll probably go for RFTs, do the Michelins cater for the stock TPMS?

Edited by ecl
Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6301301
Share on other sites

Congrats on your purchase man. You won't regret it!! :thumbsup:

The Michelin SS's are designed for the GT-R but in a non-RFT capacity, and because of their wear rating, will be my next set of tyres for sure.

Check out NAGTROC forum in the USA. There are a few members who have been using the tyres successfully without an issue on the stock TPMS for a few months now.

Edited by Wardski
Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6301368
Share on other sites

you can put the tpms in any tyre - it attaches to the rim

i have the oem tpms on my 21" ADVs and they work perfectly

all a runflat tyre really is is just a strengthened sidewall - which also adds weight in the worse place imo (excl. roof)

Edited by domino_z
Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6301393
Share on other sites

Thanks

Wardski, can you PM me the contact for the Michelins?

I am still waiting back for shipping from the US but from calling a few places (for Potenza/Dunlop), it works out a few hundred bucks cheaper. The tradeoff is obviously the shipping time though I'm not in a hurry.

The Dunlop 7010 A/S also has a good wear rating too compared to the Potenza and the Dunlop 600

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6301772
Share on other sites

Thanks

Wardski, can you PM me the contact for the Michelins?

I am still waiting back for shipping from the US but from calling a few places (for Potenza/Dunlop), it works out a few hundred bucks cheaper. The tradeoff is obviously the shipping time though I'm not in a hurry.

The Dunlop 7010 A/S also has a good wear rating too compared to the Potenza and the Dunlop 600

PM'd :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6301962
Share on other sites

Where are you guys all getting these michelins from and how are they grip wise vs the stock tyres.

You can get them from the US.. well, you have to get them from the US because Michelin will not be releasing them here (I contacted them already). So their loss IMO :whistling:

Refer here for user comments:

http://www.nagtroc.o...ally-announced/

Edited by Wardski
Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6302309
Share on other sites

Got quoted low $300 for delivery to my door for a set of GTR tyres from tirerack. Unforunately, they don't sell BBS to other markets so i'll need to find them locally or from somewhere else. Looking for either BBS or Advans.

I think i'll go for the Dunlop 7010 A/S RFT. They have good wear so it should last for a while and good grip for the street. However, with that said, I do love the tread pattern of the potenzas (a few guys asked whether they were legal lol). They are roughly the same price so i'm still a bit undecided.

The michelins are only $200 or so cheaper so it's probably safer to just go RFTs (for me).

For non-RFTs, there are also yoko advan sports and pirellis (both are quite cheaper) but again, not RFTs

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6303540
Share on other sites

on a similar note, anyone know any good distributors for advans (preferably cheap)

looking at advan TC III or RS-D's in 20s but a bit more aggressive offet so it sits a bit more flush. Does anyone know if having more aggressive offsets affect anything handling wise on the r35?

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6303590
Share on other sites

7010s are a great choice at this stage for a street tyre if you want a RFT. Expect excellent tyre life.

I feel the jury is still out on the pss, especially it's on track performance. Photos on NAGTROC don't show it wearing very well on track, much like my ps2's on an m3.

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6304155
Share on other sites

7010s are a great choice at this stage for a street tyre if you want a RFT. Expect excellent tyre life.

I feel the jury is still out on the pss, especially it's on track performance. Photos on NAGTROC don't show it wearing very well on track, much like my ps2's on an m3.

Of course, its common sense that the PSS's won't wear as good, being such a low profile and with no RFT side wall strengthening.

But for a street tyre - which is all mine will be used for - they are not as brutal on the bumps, and work well in the wet :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/396715-tyre-suggestion/#findComment-6304239
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...