Jump to content
SAU Community

Recommended Posts

Hi VultureMotorsport, I'm wondering on some prices I'm after 1000cc injectors in 3/4 length for my rb25det neo. I've got a stock manifold and a sard rail with a plazmaman plenum if that's any help? I will look forward to your reply and I hope to talk soon. Thank you. Cheers. Mick

  • Replies 191
  • Created
  • Last Reply

Top Posters In This Topic

Hi VultureMotorsport, I'm wondering on some prices I'm after 1000cc injectors in 3/4 length for my rb25det neo. I've got a stock manifold and a sard rail with a plazmaman plenum if that's any help? I will look forward to your reply and I hope to talk soon. Thank you. Cheers. Mick

Hi,

Sure, so a complete set with correct extensions and plugs would be $750.

It would include the BOSCH E85 1000cc injectors which are al match flowed, the plugs would be converters so you can mane sure of the original harness and the extensions would make them flu length.

Let me know,

Brendan

(VM)

  • 1 month later...

are bosch 1000cc injectors e85/flex compatible?

Hi,

Sure are mate, they can be used with any race fuel.

Cheers,

Brendan

(VM)

  • 2 weeks later...

NEW

> 1600cc BOSCH Short Injectors available!

:w00t::w00t::w00t:

do these have the EV1 connection for RB26 plugs or req adapters and can these be made to fit RB26 fuel rail?

If so how much?

Edited by mr skidz

do these have the EV1 connection for RB26 plugs or req adapters and can these be made to fit RB26 fuel rail?

If so how much?

Hi,

That is correct, they have standard BOSCH EV1 plugs.

The original rail uses buffers rather then o-rings so some modifications will be required.

Is swapping over to a top feed set-up an option?

Brendan

(PEC)

  • 2 weeks later...

Rb26 is top feed Injector.

When you say buffer what is that exactly?

You mean caps for height /fitment.

Hi,

Modern injectors use an o-ring to seal, these use a buffer seal so modifications will be required for fitment to the rail.

Brendan

(PEC)

  • 3 weeks later...
  • 2 weeks later...

Hi there,

could you please pm me how much for a ID1000 setup.

im going to be running e85 and currently have a standard 25 head and rail.

Thanks

Hi mate,

Sorry for the delay in replying.

So a complete set-up with plugs and extensions would be $640 for you.

These would be genuine BOSCH 1000cc EV14 injectors as used by ID.

We don't stock the ID's.

Please let me know,

Brendan

(VM)

  • 2 months later...

Hi VultureMotorsport,

Can I please get a price on a set of something around the 550cc mark (or a little bigger) which will be a drop-in replacement on the stock R33 gts-t rail (side-feed)? Also, for comparison, can I get a price on something around the 750cc range and the 1200cc range?

Cheers,

Samon.

  • 2 months later...



  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...