Jump to content
SAU Community

Recommended Posts

Google search will do.

Or unless you want the numbers of how many of them were made in each specific colour.

Here the specific colour names:

whiter34gtrnurback.jpg

QM1 - White

blackskylinegtrvspeciin.jpg

GV1 - Black Pearl

greynn.jpg

KR4 - Sonic Silver / KV2 - Athlete Silver / WV2 - Sparkling Silver: These Silver colours will vary then the on pictured.

redqy.jpg

AR2 - Active Red

bluerb.jpg

TV2 - Bayside Blue

WV2 Sparkling Silver was available, i have info saying both whites QM1 white and QX1 white pearl were sold in the nur edition cars not sure i only think QX1 was a option, TV2 bayside blue ,GV1 black pearl , JW0 millenuim jade , EY0 Silica Breath didn't come on the V-spec 2 nur but did come on the M-spec nur and M-spec models

If you are looking at buying a nur spec then white and millennium jade will come up for sale more often, reason being they made a lot of them

in these two colours as white is the Japanese motorsport colour and millennium jade is unique to nur spec ,

Quote GTROC not are if its correct

OK, OK Cem,

What I meant was all the standard colours that were available when the Nur was for sale.

The whole list (for VspecIINur) is;

Millenium Jade

Bayside Blue

White Pearl

White

Sparkling Silver

Black Pearl

__________________

Had a look at a couple GTR mags i have, found a photo of a M-spec Nur in the gold silica breath colour it was at a 34gtr owners meeting out of the 34 Nur's that turned up it was the only one so could be quite rare and does look like the white colours QX1 and QM1 were available on the Nur edition cars

yeah you would think it would have been an option for the M-spec nur considering it was a colour available at the time

must be rare or all the owners in Japan are hanging on to them because i have never seen one come up for sale

  • 3 months later...
  • 5 weeks later...

In typically ambiguous fashion, one of the Japanese books I've got mentions that, across all 1000 Nurs, Millennium Jade was the most popular colour (28%), followed by pearl white (22%) followed by white (16%)....but doesn't give any other indication of what other colours were made. It does make mention of Bayside Blue and Silica Breath further on but I'm not sure in what context.

As an apprentice painter at Nissan, if I'd created a slight blemish on "White" in the paint shop, the boss would go over it for sure in "Silica Breath".

If I'd had a night out on the sake and wee'd on a "White" Nur, the boss would cover it up with "Bayside Blue" which is why the paint thickness is way up there.

Now I'd never been sacked from Nissan, but the apprentice who was - well, all his Nurs ended up "Pearl Black"

...my dream...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...