Jump to content
SAU Community

Recommended Posts

yeah it is indeed a premium (of sorts) - doesn't have the semi-leather seats, flip-up TV, 8 speed tiptronic, Bose sound system or moonroof like I want.

They are going to ask $40k for it on the lot, so the owner said. They aren't much cheaper than that on Prestige or Jspec.

There is a blue one for sale in Qld asking $65k - wtf? Not suprisingly has been on the market a very long time and won't sell. People are pretty stupid, but not that stupid!

Also, did people see this on Jspec? * major drool* R34GTR VSpec II NUR sold surprisingly quickly! Mmmmm Millenium Jade

  • Replies 7.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

wish the 350gt premium can in manual..but at a minimum of 30k..hhhmm

As far as i know it does!

My mate was tossing up between a 350GT Manual and a EVO 8 MR but ended up gettin the EVO 7 cause he was worried about the whole complience process and wanted a car asap.

spotted a few 2day also...

silver 32 on alyiffs rd, was driving behind me around 5is

then 2nite a white 34 in town, then a white 33 s2 parked on nth tce, looked like nozillas with the side plate at the front, and a sivler 33 on main north on my way home about 12...

Spotted VANGE yesterday night on Grenfell St at bout 11pm. From far, I thought it was an R34 (while you were at the light) . Didn't realise it was you until I looked at my rear mirror.... . Lol.. It was VANGE!! Sorry mate... Should have raised my hand to say hi! :dry: Anyway, awesome looking car... Like the color of your headlights. Nice white.... What HID color temperature are you using? 6000K.....

Also spotted ROBSKI on Frome Road this morning.....

Edited by bixby
Spotted VANGE yesterday night on Grenfell St at bout 11pm. From far, I thought it was an R34 (while you were at the light) . Didn't realise it was you until I looked at my rear mirror.... . Lol.. It was VANGE!! Sorry mate... Should have raised my hand to say hi! :dry: Anyway, awesome looking car... Like the color of your headlights. Nice white.... What HID color temperature are you using? 6000K.....

lol spotted u too, jsut rem...was driving around town with some mates playing bold and the beautiful real loud lol...um dunno wat temp, WWWDOT installed them, i think they r VY lights.

its hard 2 say hi 2 ppl cos i dunno who they r! if every1 had their names like me i rekon they'd b spotted jsut as much hahaah

HOSTILE was that the red one? have seen that a couple of times.... looks nice

Saw a wine red 33 GTST driving down aylifes road around 2 this arvo. Looked like Electro. I was walking down the road from our holding yard.

spotted lots of skylines 2nite...

i saw a nozilla look alike car in town, but had custom plates

then i saw a deluxe look alike car at glenelg, both with the rear lip spoiler.

then i saw 2 silver 33s

then saw SIR032 at glenelg.

HOSTILE was that the red one? have seen that a couple of times.... looks nice

Saw a wine red 33 GTST driving down aylifes road around 2 this arvo. Looked like Electro. I was walking down the road from our holding yard.

Yep red with white wheels... just saw ya after I hooked in front of the truck.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...