Jump to content
SAU Community

Recommended Posts

Hi all, im in the process of building an R32 drifter i want around 400-450hp, its currently got RB25 i put in.

MODS

Microtech LT12s

FMIC

3inch exhaust

YellowJacket coil packs

Stock everything else

its making 200kw on 12psi

My plan is the folowing mods

hypergear xIU stock 25 turbo highflow

WMI

Will this come close to that power figure or will i be better off buying a GTX 30/76?

Edited by 51NNA
Link to comment
https://www.sau.com.au/forums/topic/397558-400-450hp-rb25-build-questions/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Well you will need bigger injectors, Fuel pump, a little highflow wont make 450hp at the wheels

GTX3076 will be over kill, better off with a GT3076 or if you really want a silly billet wheel then a GTX3071 would be better suited

Assuming you mean 400-450HP at the engine, then yeah, the Hypergear highflow will get you up into that space. But you're likely to need more fuel. I wouldn't rely on the meth in the WMI to provide enough. You're also likely to need to make sure the ignition system will cope.

It does have yellowjacket coil packs, i was hopeing for RWHP and Zebra i wasnt 100% sure on spending the extra 500$ for a billet wheel, but would you go a 71 over a 76? and my injectors are only on 50%duty cycle so hopefully they would cope too atleast 370-400hp with the WMI

Are they standard injectors? If so they will not do 400rwhp, about 300rwhp is the limit at standard rail pressures

WMI should not be used to increase fueling capacity, doesnt work like that

GTX3076 is capable of 500+rwhp on the right fuel nad engine, but slightly laggier than the regular GT3076 which will do just shy of 500rwhp on the right fuel/engine

Well i was hoping too be sneaky and run my AFR at 13 with the wmi protecting against ping, ATM its 199.6rwkw with 53% duty cycle with stock injectors on 12:1 afr

Edited by 51NNA

Its pretty interesting to find that Toshi managed 2x 260rwkws R33 using our stock 21U R33 high flowed turbos on factory injectors pump 98 done on two different dynos. Not sure whats the go there, unless he can flash the stock ECU to run stock injectors at 100% injection or some thing similar.

only with toshi's remaps.

2 results out of hundreds of others doesnt make it a trend imo

Only with toshi's remaps. I remember he stated some where that he can make it do that no worries. I've never seen that done with other tuners.

Well looks like im up for some injectors too lol, 550cc be enough?

OR buy a GT30/76 or GT30/71, WMI and put it back on the dyno and see what happens and go from there, after all spending 1k on injectors i might not need (probly will do) but would be interesting too see what happens?

Edited by 51NNA

most would say 75% injector duty would be the max they would want for safety...

get siemens injectors and a new rail and it will be cheaper than sard or nismo injectors and you can get larger to support E85 and not worry about WMI....

Its pretty interesting to find that Toshi managed 2x 260rwkws R33 using our stock 21U R33 high flowed turbos on factory injectors pump 98 done on two different dynos. Not sure whats the go there, unless he can flash the stock ECU to run stock injectors at 100% injection or some thing similar.

I made 260kw at 15psi so never 100% injector duty.

Injector duty is around 88-92%.(depends on AFR)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...