Quickest Way For Fix R33 Rb20 Fuel Injectors (A4600)

[L-u-k-e]

Hey All,

I've been trying for a few days now to track down replacement fuel injectors for an RB20E. It uses stock A4600 injectors which seem rather hard to find. Best I can do at the moment is some $1200 and 3 week wait - sounds more like the cost of a new engine! Posts in Wanted-To-Buy have turned up no results. Would it be cheaper / faster to upgrade the whole fuel system / engine to RB25? Atleast I might pickup a turbo for the money rather than some boring old fuel injectors.

Thoughts or advice?

Luke

[Got a Pulsar]

I'll sell you 3 fuel rails with a total of 12 (270cc) injectors to suit Ka24de engine.

Dunno if they will fit but for $180 might be worth a try.

[StevenCJR31]

Are your injectors top feed? if so then you will find that R32 RB20det will fit and R32 RB25de injectors will fit,. . . stock R33 RB25DET injectors are SIDE feed and unlikely to go on your stock intake manifold without a fight

[WYTSKY]

drop in a 25... I think you have the worst combo motor the skylines came out with... 2 litre, non turbo, single overhead cam. wouldn't put to much money on it...

if you stick with the n/a route I have seen n/a 25de's go for about $600-900 complete, turbo 25de's about 1500-2000.

[Captain Natro]

hey wtysky, where can i find one of these 600 de's pm lol

[WYTSKY]

http://www.skylinesa...__fromsearch__1

searched rb25de in private sale parts. $700 I know that it was posted a couple of months ago, but as an example.

http://www.skylinesa...__fromsearch__1

This was posted decemeber last year, "rb25det long motor not 100% sure on condition only idle it in car no noises no smoke

car had 66000ks on it, sat in a shed for 8 years after accident $800 firm"

http://www.skylinesa...__fromsearch__1

This was posted Sep last year, but has been active up to 2 weeks ago....

"RB25DE non Turbo with 4WD sump (comes with loom + ECU) $600" he is in melb too.

You get the idea.... search, stay vigilant, and ye shal find

I see heaps of these going on here, just gotta check every day for something new.

[jhjones]

Did you get them cleaned and flow tested first?

[L-u-k-e]

Bit of an update - Put RB25 270cc ones in - Wont even rev over 4000 with no load. EPIC fail. Thanks all