Jump to content
SAU Community

Recommended Posts

Hi all, I'm off to eastern creek this Wednesday , hope to beat my previous time of 14.4 ,that was done with a dump pipe and exhaust , now I have a transgo kit I'll let you know the difference and my 60ft time was 1.9 done last time so I want to improve that as well. Let you all know how I go and any wants to join me please come down. Cheers rudi

Link to comment
https://www.sau.com.au/forums/topic/397699-400m-drag/
Share on other sites

  • Replies 179
  • Created
  • Last Reply

Top Posters In This Topic

I'm actually off this Wednesday; I might join you!

I've been keen to get back out there, as I only had a dump pipe on mine; nothing else. Hence my 14.9.

It would be interesting to see what difference my mild mods so far have made; it's certainly a different car on the road.

Link to comment
https://www.sau.com.au/forums/topic/397699-400m-drag/#findComment-6314146
Share on other sites

How much is it and what time do they start?

I think gates open around 4:30pm and cost is around $50. You also need a compliant helmet; there is a list.

http://www.sydneydragway.com.au/?m=events&a=event_page&id=156

Link to comment
https://www.sau.com.au/forums/topic/397699-400m-drag/#findComment-6314183
Share on other sites

I think gates open around 4:30pm and cost is around $50. You also need a compliant helmet; there is a list.

http://www.sydneydragway.com.au/?m=events&a=event_page&id=156

Be good if your there dale need to talk to you about sway bars
Link to comment
https://www.sau.com.au/forums/topic/397699-400m-drag/#findComment-6314212
Share on other sites

I just received this on FB from the Sydney Dragway feed;

Hi all, unfortunately we have to cancel tonight's Hi-Tec Oils Race 4 Real ... there is little chance of the weather clearing this afternoon. Please take care on the roads and be safe.

So it looks like we're out of luck for this week.

:angry:

Link to comment
https://www.sau.com.au/forums/topic/397699-400m-drag/#findComment-6319266
Share on other sites

Thanks for the info dale, look forward to catching up next time at the creek, I'm guessing in 2 weeks as next we'd is a public holiday.

Yep, I'll be on for that; working next Wed, so 2 weeks away works well with my roster.

Going to have to push my LPG fed XR8 owning mate to come out too.

Link to comment
https://www.sau.com.au/forums/topic/397699-400m-drag/#findComment-6319585
Share on other sites

  • 2 weeks later...

I'm out this week unfortunately; missus is doing stocktake on Wednesday night.

I'm sure my young bloke would like to come with me; but I don't think they'd be too happy about me doing runs with a 3 year old asleep in the back... :whistling:

Link to comment
https://www.sau.com.au/forums/topic/397699-400m-drag/#findComment-6337835
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...