Jump to content
SAU Community

Rb26 Sard 800Cc Injectors, Greddy Plenum, Ap Racing Brakes

scissored sil
 Share

Recommended Posts

scissored sil Collaborator

scissored sil

Posted
Posted

Hey All,

My old for sale thread sorta just got added to and is old and messy now.

Thought I would start a new thread that actually had the items for sale listed.

All items are located in North Brissie. (unless stated)

Postage can be arranged, at buyers expense.

My best contact is either mobile 0428142684 or email [email protected]

rb26 coil packs - $200 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

sard 800cc injectors - $600

These have about 5000km of use on them. I wil be upgrading to higher flowing injectors. - does not include fuel rail.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

post-39837-0-47555100-1334923847_thumb.jpg

post-39837-0-80276700-1334923858_thumb.jpg

post-39837-0-55250200-1334924037_thumb.jpg

post-39837-0-92392000-1334924144_thumb.jpg

scissored sil Collaborator

scissored sil

Posted
  • Author
Posted

injectors fully sold.

items still available:

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

Open to offers people, worst I can say is no thanks.

scissored sil Collaborator

scissored sil

Posted
  • Author
Posted

bump.

and back on the market, if anyone is interested...

short motor component of my engine. Done about 5000km as well.

N1 Block

Tomei 2.8L cooling channel type kit (pistons, rods, crank)

Tomei oil pump

ATI 1000hp type balancer with the pulley for the water pump.

Tomei sump baffle.

um... *shrug* 10k?

scissored sil Collaborator

scissored sil

Posted
  • Author
Posted

Tomei oil pump sold.

This is as far as I want to split it, as if i decide to keep the bottom end i it is getting dry sump.

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

  • 3 months later...
scissored sil Collaborator

scissored sil

Posted
  • Author
Posted

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

scissored sil Collaborator

scissored sil

Posted
  • Author
Posted

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...