Jump to content
SAU Community

Recommended Posts

My one is playing up intermittently according to the MFD.

The DSBC display is OK though.

So, I'm in the market for a BNR34 Boost Sensor - which I think is located near the firewall on the driver's side.

Anyone wrecking?

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/398276-boost-sensor-for-a-bnr-34/
Share on other sites

My one is playing up intermittently according to the MFD.

Try resoldering the pins where it plugs in on the sensor.

Should fix your problem

Hey mate,

I've had to do this to 3 of my R34's, also had to do it to my GTR.

Happy to do it for you free of charge if you're in the area. PM me if you need help and we'll tee up a time.

Cheers.

Oh I thought it might just be mine. I'm having the same problem. I recently bought a new MFD because my old one had a line down the LCD display. Once it was installed the boost gauge on it invariably worked. It ALWAYS worked when the old one was hooked up, now sometimes it works and shows boost normally and the rest of the time the boost gauge just has nothing on it at all??? Is thais what's happening with you too Terry?

Yes Mike; exactly the same symptoms on the MFD.

Yet the Boost Controller Display works perfectly all the time.

So I'm expecting that the soldering of a couple of pins on the Sensor near the firewall on the driver's side will restore the bar graph to perfection.

Hello,

Im no expert but if the gauge is not even showing on the GTR MFD, it could possibly be because the boost sensor itself is not being recognised.

Maybe check your sensor is not unplugged or if the plugs going to it are not stuffed, you could also check the sensor itself has no other dry joints inside it (apart from the common 3).

Grain of salt, but its a starting point.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...