Jump to content
SAU Community

Recommended Posts

hey everyone...i have recently brought a r33 gts-t...person i got it off says it has 250kw at the rear wheels....a mate finds it hard to believe as its mostly stock.......has stock intercooler....he told me it has a sierra hybrid turbo with custom made wheel (stainless)...it has a boost controlller on it and he said it runs at 12p for the 250kw and can be turned up to 28p for over 500kw...is this all a lie?? i got it pretty cheap and interior is in great condition so i wouldnt be fussed if it was stock power.... i have it booked for a dyno on thursday......any info would be good cheers.....

Link to comment
https://www.sau.com.au/forums/topic/398465-some-information-for-me/
Share on other sites

hey everyone...i have recently brought a r33 gts-t...person i got it off says it has 250kw at the rear wheels....a mate finds it hard to believe as its mostly stock.......has stock intercooler....he told me it has a sierra hybrid turbo with custom made wheel (stainless)...it has a boost controlller on it and he said it runs at 12p for the 250kw and can be turned up to 28p for over 500kw...is this all a lie?? i got it pretty cheap and interior is in great condition so i wouldnt be fussed if it was stock power.... i have it booked for a dyno on thursday......any info would be good cheers.....

the dyno will sort out all this for you, post up your results when ya get them

W. C. Fields once said, "There's a fool born every minute"...

and until you mentioned about the low price and the quality of the interior, I was thinking, "Oh no, here we go again!"

We'll be interested not only about the dyno graphs but also what the tuner says he can do within your future budget. Hope it's all good in other areas too.

Cheers,

hahah yer ill post the dyno results when done...everything else is in great condition on it...guy has owned it for 14 years and imported it himself....it drives very well and does go a tad harder than a few mates stocks....but only a tad...interior is brand now and body is perfect which made me pretty much buy it.....aint a a fool buddy...looked at a few before this one and what people want for pieces of shit is a joke haha ill post dyno results in 3days when its done

haha a getz?? would be ashamed if my mum had one of them... all good i paid 8000 for it with a new set of tyres and roadworthy so i dont mind

that's not that cheap. that's about normal price for them.

hahah yer ill post the dyno results when done...everything else is in great condition on it...guy has owned it for 14 years and imported it himself....it drives very well and does go a tad harder than a few mates stocks....but only a tad...interior is brand now and body is perfect which made me pretty much buy it.....aint a a fool buddy...looked at a few before this one and what people want for pieces of shit is a joke haha ill post dyno results in 3days when its done

based on all the other crap the guy said, i highly doubt that too. but looking at thecompliance plate will tell you when it was imported so you can see for yourself when it was complianced

yer stock ecu hugh...well it is but not roadworthied and immaculate condition which i couldnt find one like...also has near new triple plate clutch which im sure of cuz mate did it for him so i knew thats not a lie....well a anyway im happy with it and will make it much better in the next few months anyway....and yer terry i do know i was just saying

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...