Jump to content
SAU Community

Fab Shops/business In Sydney (W)

GTR_RB26TTS

By GTR_RB26TTS,
in Fabrication

 Share

Recommended Posts

GTR_RB26TTS Explorer

GTR_RB26TTS

Posted
Posted (edited)

Morning all.

After a Fab shop up Syd way. Well, more like Penrith but I don't mind driving to discuss or even towing the race car down and going over a few things.

Things like catch can, some piping redirection and front half of exhausts

Who have you guys used and would recommend? Can do most stuff myself, have essentially built the car but welding isnt really my stronger points and would rather a decent job that does fail on me down the track

Thanks. Pete

Edited by GTR_RB26TTS
Link to comment
https://www.sau.com.au/forums/topic/398490-fab-shopsbusiness-in-sydney-w/
Share on other sites
Risking Grand Master

Risking

Posted
Posted

I'll put my hand up and say I can help you with what your after.

Have a look at my fabrication thread just a couple of threads under this one for some examples of my work.

Located in Campbeltown so not too far from penrith, specializing in race fabrication.

Pro fabrication

0404 832 620

Frisky Apprentice

Frisky

Posted
Posted

Check out Speedfab.com.au Backyarder owns it,he worked wonders for Gasmotorsport as their fabricator.The best fab work ive seen ,and im an aircraft engineer,so ive seen a bit.

Hi again,

I'm a bit confused.. I pm'd you regarding work on my car & you gave me some useful info but is Speedfab your business or should I be contacting someone else? Or is this some backyard job?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...