Jump to content
SAU Community

Z32 Ecu With New Nistune Board Suit R33 Rb25

Toshi
 Share

Recommended Posts

Toshi Proficient

Toshi

Posted
Posted

I have x2 Z32 ecu suit R33 RB25.

x1 for series 1 Z32 ecu

x1 for series 2 Z32 ecu

I am able to program to NEW nistune board for your injector and AFM.

So you can drive to your tunes shop if you change injector or AFM your self.

Fuel and timing map is std so please do not rev.

Price $550 std R33 data and $600 tuned R33 data.

Price include Z32 ecu and NEW nistune board.

Link to comment
Share on other sites
  • 1 month later...
  • 1 month later...
  • 2 weeks later...
M@&k Community Regular

M@&k

Posted
Posted

G'Day Toshi,

Do you still have this ecu available? I've read that there are some internal mods that need to be done to the ecu to work on the R33 series 1 (I have 1994 model). I'm assuming you've already done these and fitted the Nistune board?

Unfortunately can't come and see you for a tune, as I'm in Perth (have read many good things about your work). But would be keen to buy off you if you can ship here.

Cheers,

Mark.

Link to comment
Share on other sites
Toshi Proficient

Toshi

Posted
  • Author
Posted

Yes , I have.

If you do not need tuned data I can do $550.

$600 is with street tune map.

Also I have race map.

This nissan laurel std turbo RB25 DET is real time tune race map.

If you are interesting same tune I can come Perth if I found over 3 people.

http://www.youtube.com/watch?v=Vb4kF8O531k

.

Link to comment
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • r32-25t
      Bolt dress up kit

      By r32-25t · Posted

      They sell them in Malaysia for about $4
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...