Jump to content
SAU Community

Recommended Posts

So, I've had this car for almost a year and I have never noticed this, hence why I'm here.

Let's say your driving off boost. Then you push the throttle a little further until you make boost, as soon as it goes from 0psi to positive boost, there's a click, like a relay click, coming from where the boost solenoid is in the bonnet.

Has it always done that? Haha. I'm paying a lot of attention to it now... Grrr

Thanks

Link to comment
https://www.sau.com.au/forums/topic/399393-can-you-he-the-clicking/
Share on other sites

It must be quite common, had to follow my old man his pathfinder recently, when we went onto the motorway on ramp I was going to fly past him, but just before thought I felt something vibrating in the back and ended up not even keeping up with him! :action-smiley-069: haha, car's been fine since

Edited by WMDC35

yes, if you turn the ignition on you should hear it clicking as the solenoid opens and closes.

mine sounded like a playing card in bicylce spokes haha

He is right, I shat my bricks when I heard it too. Put the ignition to "on".. "click" i kept wondering for a couple of days and with some research it was the solenoid.

yes, I get that all the time haha

usually after I give the car a squirt...spend the next hour listening for broken bits lol

This is exactly the same as me

I've spent every drive since my tune listening and popping bonnet.

So much so that my bonnet cable is farked

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...