Jump to content
SAU Community

Recommended Posts

Im currently parting out my R34 GTT with GTR runing gear. everything must go.

R34 GTR parts as follow

Gatrag 6 speed gearbox, perfect working order, good meat left on 4wd transfer case. comes with pull type AND push type fork and slave cylinder, 5month old nismo gearbox mount, and support brace, complete with GTR shift knob, AND front prop shaft: $4000

R34 GTR Year 2000 V-spec turbo, perfect with no shaft play $350/pair

STD GTR injectors $200/for 6

Pearl White GTR aluminium bonnet, minnor dent on the front area, fine as is or just a touch up: $500, bargin!

R34 GTR Tail shaft: $200

Light weight flywheel (7kg) and exedy heavy duty single plate clutch: use less than 9 month with light foot, never launch, just bed in. paid $1600, pull type $800

Vspec dash cluster, 25xxx or 26xxxkm on the clock (Rare very low K), no clouds, no marks. Perfect!. $200

Apexi boost controller. with leads. $50

front subframe, $150

Uprights: $150 ea side

Lower and uppper arm: $120 ea side

Steering Rack, 2.5 lock to lock : $150

Sway bar: $50

Front Shaft $120 ea

Or the whole front suspension setup $900

Std R34 gtr intank Fuel Pump. higher flow than pervious model, support up to 280kw awkw no worries, $120

V-spec very little k's travel. $650

V-spec hydroic pump assembly, wiring hardness been modified, suit spare $200

STD rb26 AFM $100

GTR twin turbo 60mm into 70mm front pipe. mines style, very good flow probably the best twin front pipe design. $250

34 gtr fujisubo Full exhaust. Jasma Approved. flows very well and very quite, 80mm main pipe, made over 300kw with this pipe before. $350

CATCO 3" High Flow cat, Brought for $200, selling $80

OEM R34 GTR sideskirt with front guard lower skirt, RHS minior twisted $250

GTR replica full carbon fiber rear wing with OEM height (custom requested for oem height) $350

R32/33 GTR parts:

R32/33 Apexi Power FC, complete with hand controller. a minor scrach on the hand controller but wont affect the readding at all $750

GTR BOV $120/ pair or $70 each.

R32 intercooler $70

Thick full alloy radiator 8 months old, suit R32 $80

Item located doncaster east Melbourne.

PM call or text 0433289998.

cheers

joe

Edited by godsmind

some pics on this thread

http://www.skylinesa...66#entry6333066

Boost controller is actually solenoid only. no actual control unit. sorry for the miss leading.

V-spec R34 diff very little k's travel. $600

Will upload as much pics as i could.

Edited by godsmind

Gatrag 6 speed gearbox, perfect working order, good meat left on 4wd transfer case. comes with pull type AND push type fork and slave cylinder, 5month old nismo gearbox mount, and support brace, complete with GTR shift knob, AND front prop shaft: $4000

R34 GTR Year 2000 V-spec turbo, perfect with no shaft play $350/pair

STD GTR injectors $200/for 6

Pearl White GTR aluminium bonnet, minnor dent on the front area, fine as is or just a touch up: $500, bargin!

R34 GTR Tail shaft: $200

Light weight flywheel (7kg) and exedy heavy duty single plate clutch: use less than 9 month with light foot, never launch, just bed in. paid $1600, pull type $800

Vspec dash cluster, 25xxx or 26xxxkm on the clock (Rare very low K), no clouds, no marks. Perfect!. $200

front subframe, $150

Right hand Upright: $150

Right Lower and uppper arm: $120

Steering Rack, 2.5 lock to lock : $150

Sway bar: $50

Right Front Shaft $120

Std R34 gtr intank Fuel Pump. higher flow than pervious model, support up to 280kw awkw no worries, $120

V-spec Diff very little k's travel. $650

V-spec hydroic pump assembly, wiring hardness been modified, suit spare $200

STD rb26 AFM $100

GTR twin turbo 60mm into 70mm front pipe. mines style, very good flow probably the best twin front pipe design. $250

CATCO 3" High Flow cat, Brought for $200, selling $80

OEM R34 GTR sideskirt with front guard lower skirt, RHS minior twisted $250

GTR replica full carbon fiber rear wing with OEM height (custom requested for oem height) $350

R32/33 Apexi Power FC, complete with hand controller. a minor scrach on the hand controller but wont affect the readding at all $750

GTR BOV $120/ pair or $70 each.

R32 intercooler $70

Thick full alloy radiator 8 months old, suit R32 $80

  • 1 month later...
  • 4 weeks later...

Gatrag 6 speed gearbox, perfect working order, good meat left on 4wd transfer case. comes with pull type AND push type fork and slave cylinder, 5month old nismo gearbox mount, and support brace, complete with GTR shift knob, AND front prop shaft: $4000

R34 GTR Year 2000 V-spec turbo, perfect with no shaft play $350/pair

STD GTR injectors $200/for 6

Pearl White GTR aluminium bonnet, minnor dent on the front area, fine as is or just a touch up: $500, bargin!

R34 GTR Tail shaft: $200

Light weight flywheel (7kg) and exedy heavy duty single plate clutch: use less than 9 month with light foot, never launch, just bed in. paid $1600, pull type $800

Vspec dash cluster, 25xxx or 26xxxkm on the clock (Rare very low K), no clouds, no marks. Perfect!. $200

front subframe, $150

Right hand Upright: $150

Right Lower and uppper arm: $120

Steering Rack, 2.5 lock to lock : $150

Sway bar: $50

Right Front Shaft $120

Std R34 gtr intank Fuel Pump. higher flow than pervious model, support up to 280kw awkw no worries, $120

V-spec Diff very little k's travel. $650

V-spec hydroic pump assembly, wiring hardness been modified, suit spare $200

STD rb26 AFM $100

GTR twin turbo 60mm into 70mm front pipe. mines style, very good flow probably the best twin front pipe design. $250

CATCO 3" High Flow cat, Brought for $200, selling $80

OEM R34 GTR sideskirt with front guard lower skirt, RHS minior twisted $250

GTR replica full carbon fiber rear wing with OEM height (custom requested for oem height) $350

R32/33 Apexi Power FC, complete with hand controller. a minor scrach on the hand controller but wont affect the readding at all $750

GTR BOV $120/ pair or $70 each.

R32 intercooler $70

Thick full alloy radiator 8 months old, suit R32 $80

hey man do u still have the lower controller arm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...