Jump to content
SAU Community

Recommended Posts

All parts are from a series 2 97 r33 gts manual. Had a impact in the front but fixable with a dressed front cut. It is fixable but I have decided to strip it. Just ask if you need something not listed. I will post most items. If its bigger I may get you to source your own courier. I can find at least one day a week I can meet a courier.

Also if you need something and the price is honestly a bit steep don't be afraid to have a chat to me about it. That doesn't mean I want to be low balled on everything but id like to think im fair and reasonable. If you disagree however please don't comment on that lol. If you would like pics please let me know. Il try and get pics tonight of the non standard gear.

Manual Conversion

Series 2 sunroof shell. Currently rolling with manual conversion installed. 3k Can be negotiated as to how much i remove or keep there. on repariable write off register

Full series 2 interior

Front seats

rear seats

COMPUTER $100

TAIL SHAFT $200

R200 WITH CRADLE DIFF IN VGC $250 ABS diff

Abs pump

DRIVESHAFTS $65 EACH

HICAS $80

POWER STEERING RACK $150

POWER STEERING BOTTLE $20

BRAKE MASTER CYLINDER $150

SWAY BARS $20 EACH

Horn $20

Front wiper motor - $50

Rear Wiper Motor - $50

STEERING COLUMN $50

(Body parts)

series 2 headligtht Passenger side 175

Passenger front guard $50 very slight mark

Drivers door 300

Pass door $300 includes glass window reg and everything

Boot very minor damage to rear drivers side lip. $60 no wing

Rear tail lights

(DASH PARTS)

turbo cluster with 167000km's $150

DASH NO CRACKS OR BUBLES OR HOLESLOOKS LIKE NEW with airbag $300

ALL VENTS $75

GLOVE BOX $30

CENTRE CONSOLE $150

CLIMATE CONTROL UNIT $75 BOTH BUTTONS WORK

HEATER CORE $70 A

IRCON CORE $70

HEATER FAN $20

(INTERIOR)

INDICATOR / WIPER SWICH Headlight, fog lights / ASSEMBLY $100

HANDBRAKE $30

REAR TRIMS $30 EACH

SEAT BELTS SET $150

INTERIOR LIGHT $15

PLUSH CARPET $70

PASSENGER DOOR TRIM $75

POWER WINDOW SWITCH PASS SIDE $25

BOOT TRIMS $70

POWER ANTENNA $50

PILLER TRIMS $20 EA

ROOF LINING $40

KICK PANELS $10 EACH

R33 GTST. Skuff plates, both sides $35

Rear Seats - $100

Door seals $25 each

Boot seal $25

Rear ¼ trims - $50 each

Rear1/4 window surrounds $50 each

A pillar Trims $20 each

B pillar trims

Door cards

Rear Vision Mirror $20

(ODDS AND ENDS)

FUEL TANK $30

FUEL PUMP $50

WASHER BOTTLE $20

RADIATOR OVERFLOW BOTTLE $20

WINDSCREEN $200

QUARTER GLASS $30

REAR WINDOW $200

BATTERY HOLDER $20

WIPERS $15

FUEL LINES $50

FUEL FLAP $10

FUEL CAP $10

Engine Mounts - $80

Radiator overflow bottle - $20

Stock BOV - $40

Sun visors $30

Handbrake assembly & cables - $160

Sing out if you need anything not listed. PM me or get me on 0424506009

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Hum. no idea what your building there. there would be a few more variables like what type of car its going in for the leingth. iv never tried ether so im not sure sorry mate.

i honestly cant answer that having never done it before. could you possibly ring a local wrecker or import car workshop? or maybe have a search around here? id hate to give you the wrong info. Im also not splitting teh tailshaft from teh manual conversion yet.

Sure do.

i also have an aftermarket wing thats slightly bigger than the series 2 wing. looks really cool. il get some pics of it. Also have a front strut bar. Heaps of other stock bits i havent actually listed. Will try and list them individually but sing out if u need anything.

Have you got the driver side plastic bit for the electronic windows ? Also the plastic bit that fits around the inside of the driver side door where the open handle is.

Where are you located?

Edited by DarkRyda

Hey mate. Im on the Gold Coast. the plastic holder for the window switch is cracked at the base around where the door handle cup is. You probably dotn want it then?

il have a look for the handle bit you want later when i get home.

hi mate,

i am after driver side window door rubber seal which runs along the door.its like thick rubber...someone tried to pinch my car so they cut the rubber to unlock the door from the top.

thanks

Hey mate, chasing 950 for the whole manual conversion. it is a na box but im told they are still good for a mildly modded turbo car if thats what you have.

Others iv sent pm's to. Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...