Jump to content
SAU Community

Recommended Posts

intake manifold (with injectors and fuel rail )

both rear lower control arms

clutch brake pedal plus master cylinders

cas

tail lights

fuel pump

adjustable front tie rod ends

take the lot for $150

s2 r33 front seats $100 for both

IMG_10201_zpsfb05993f.jpgIMG_10191_zpsd8f98250.jpg

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

PM'd you :)

Brand New Unopened 2" SPECO 533-03 Street Series BOOST GAUGE - $50.00 $40.00 pickup or $50.00 Posted.

post-78856-0-49856600-1384509169_thumb.jpg

Want it Gone.

Buy the flamin mongrel ya dream boats!

For the love of rajab. :worship:

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

I want the micra, but no kesh :(
661 Carbon fibre full face pushbike helmet, size MEDIUM. Purchased brand new, worn 2 or possibly 3 times, never actually utilised (ie never had a crash while wearing). Minor cosmetic scratches sustained while moving house; in no way affects safety, you can barely see them. Helmet is the same as below picture.


$200, will post at buyer's expense


1448.jpg



Mace "swat jacket" body armour, unsure of size (can check). Worn only once, never utilised either. Comes with detachable armadillo-style spine protector. Same as pic below.


$150, will post at buyer's expense


p4pb5178452.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...